Hitachi C 10FCE instruction manual Specific Safety Rules for Use of this Power Tool

Page 4

English

9.ALWAYS USE EYE PROTECTION WHEN WORKING WITH THE TOOL TO PREVENT EYE INJURY. Ordinary eyeglasses do not provide adequate protection because the lenses are not

made of safety glass. Also, use a face mask for additional safety and wear a dust mask if the cutting operation produces dust.

10. ALWAYS SECURE THE WORKPIECE TO THE FENCE OR THE TABLE. Use clamps or a vise to hold the workpiece in place. It is safer than using your hand and it frees both hands to operate the tool.

11.NEVER OVERREACH. Always keep proper footing and balance when working with the tool.

12.ALWAYS MAINTAIN TOOLS WITH CARE. Always keep tools sharp and clean for the best and safest performance. Always follow instructions for lubricating the tool and for changing accessories.

13.ALWAYS DISCONNECT THE TOOL before servicing and before changing blades or other accessories.

14.NEVER RISK UNINTENTIONAL STARTING WHEN PLUGGING IN THE TOOL. Always confirm that the switch is in the OFF position before inserting the power plug into the receptacle.

15.ALWAYS USE RECOMMENDED ACCESSORIES ONLY WHEN OPERATING THIS TOOL.

Consult this instruction manual for descriptions of recommended accessories. To avoid personal injuries, use only recommended accessories in conjunction with this tool.

16.NEVER STAND ON THE TOOL. Prevent serious injury by not tipping the tool and by not risking unintentional contact with the saw blade.

17.ALWAYS CHECK FOR DAMAGED PARTS BEFORE USING THE TOOL. Always check the guard and all other components for damage before using the tool to assure that they will function properly. Check all moving parts for proper alignment, freedom from binding and other conditions that might affect proper operation. Always repair or replace any damaged guards or other damaged components before using the tool.

18.ALWAYS CONFIRM THE ROTATION DIRECTION OF THE BLADE BEFORE USING THE TOOL. Always feed work into the tool against the rotation direction of the blade in order to prevent possible injury.

19.NEVER LEAVE THE TOOL RUNNING WHILE UNATTENDED. TURN POWER OFF. Do not leave tool until it comes to a complete stop. Always turn the power off when the tool is not in use. Always unplug the power cord when the tool is not in use.

20.This tool was not designed to be used for mass-production applications and should not be used in mass-production environments.

21.When servicing this tool, use only authorized replacement parts.

22.Apply 120 volts AC only to this tool. Applying the wrong voltage or applying DC power can cause the POWER TOOL to operate improperly and cause serious personal injury or damage to the tool.

23.Never raise the saw blade from the workpiece until it has first come to a complete stop.

24.Always use outboard stands to provide support for long workpieces that overhang the table of the slide compound saw.

25.Always return the carriage to the full rear position after each crosscut operation in order to reduce the risk of injury.

26.POLARIZED PLUGS To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

Specific Safety Rules for Use of this Power Tool

WARNING: The following specific operating instructions must be observed when using this POWER TOOL in order to avoid injury:

DO’s

ALWAYS OBSERVE THE FOLLOWING RULES TO ASSURE SAFE USE OF THIS TOOL:

1.Review this Manual and familiarize yourself with the safety rules and operating instructions for this POWER TOOL before attempting to use it.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Avertissement AdvertenciaContents Meanings of Signal Words Important Safety InformationImportant Safety Instructions for Using ALL Power Tools Specific Safety Rules for Use of this Power Tool DON’Ts Replacement Parts USE Proper Extension Cord Double Insulation for Safer OperationOperation and Maintenance Name of PartsSpecifications C10FCHApplications InstallationPreparation Before Operation Before Using Installing the dust bag, holder, stopper and visesMake sure the power source is appropriate for the tool Releasing the locking pinBefore Cutting Confirmation for use of sub fence …Optional accessory Position adjustment of laser line Only Model C10FCHSwitch Laser Line Switch operation Practical ApplicationsUsing the Vise Assembly Standard accessory Cutting OperationBevel cutting procedures Miter cutting proceduresCompound cutting procedures For miter cut setting Crown molding cutting proceduresFor bevel cut setting Crown molding Stopper L and R optional accessories allow How to use the dust bag Standard accessory SAW Blade Mounting and DismountingCutting easily-deformed materials, such as aluminum sash Mounting the saw blade -a, -b, -c and -dDismounting the saw blade Maintenance and InspectionInspecting the saw blade Inspecting the lever Inspecting the carbon brushes and FigAbout Handling the Motor see Fig Inspecting the screwsCleaning Service and RepairsLubrication Signification DES Mots D’AVERTISSEMENT Informations Importantes DE SécuritéConsignes DE Securite Relatives AUX Outils Électriques Français Consignes de sécurité spéciales pour cet outil électrique Français Utiliser LE Cordon DE Rallonge Approprié Pieces DE RechangeDouble Isolation Pour UN Fonctionnement Plus SUR Français Utilisation ET Entretien NOM DES PiècesSpécifications Préparation Avant L’UTILISATION Avant L’UTILISATION Libérer la goupille de verrouillage’assurer que la source d’alimentation convient pour l’outil Vérifier que la gâchette est sur OFFAvant LA Coupe Une coupe stable du matériau avec une face arrière large Remarques Applications Pratiques Fonctionnement de l’interrupteurUtilisation de l’ensemble d’étau Accessoire standard CoupeProcédure de coupe de biseau Procédure de coupe d’ongletProcédures de coupe mixte Réglage d’une coupe d’onglet Procédures de coupe de corniche complexeRéglage d’une coupe de biseau ’étau B de corniche complexe accessoire en option peut Installation ET Retrait DE LA Lame Utilisation du sac à copeaux Accessoire standardInstallation de la lame -a, -b, -c et -d Retrait de la lameEntretien ET Inspection Service APRÈS-VENTE ET Réparations RemisageGraissage NettoyageSignificado DE LAS Palabras DE Señalización Información Importante Sobre SeguridadNormas DE Seguridad Para LAS Herramientas Eléctricas Español Español Español Piezas DE Reemplazo Utilice EL Cable Prolongador Adecuado Aislamiento Doble Para Ofrecer UNA Operación MÁS SeguraOperación Y Mantenimiento Nomenclatura DE PartesEspecificaciones Mesa giratoria Dimensión máxima de corte Máxima IngletesPreparativos Previos a LA Operación AplicacionesInstalación Antes DE LA Utilización Liberación del pasador de bloqueoCerciórese de que el interruptor de disparo esté en OFF Compruebe si la hoja de sierra posee defectos visiblesAntes DEL Corte Posición de ajuste de la línea de láser Sólo modelo C10FCH Mm, como se muestra en la FigContinuación introduzca una llave de barra hexagonal de Aplicaciones Prácticas Operación de conmutaciónOperación de corte Procedimientos de corte de ingletes Procedimiento de corte de ingletesProcedimientos de corte compuesto Para el ajuste de corte de ingletes Procedimientos de corte con moldura en vérticePara el ajuste del corte en bisel Se muestra en la -a. Después de la in sercion, apriete el Forma de utilizar la bolsa para el polvo Accesorio estándar Una posición en que no haga contacto con la hoja de sierraMontaje Y Desmontaje DE LA Hoja DE Sierra Montaje de la hoja de sierra -a, -b, -c y -dMantenimiento E Inspección Desmontaje de la hoja de sierraInspección de la hoja de sierra Inspección de la palancaServicio Y Reparaciones Page Page Page Page Page Page Page Page Hitachi Koki Canada Co

C 10FCE specifications

The Hitachi C 10FCE is a powerful and versatile 10-inch sliding compound miter saw designed to meet the needs of both professional contractors and serious DIY enthusiasts. Renowned for its precision and ease of use, this tool is engineered to deliver accurate cuts while offering a range of features that enhance its functionality.

One of the standout features of the C 10FCE is its 15-amp motor, which delivers a robust performance capable of cutting through a variety of materials, including hardwoods, softwoods, and engineered woods. The motor provides a no-load speed of 5,000 RPM, allowing for swift and efficient cutting tasks. The saw is equipped with a unique 0 to 52-degree miter angle range, providing versatility for making precise crosscuts at various angles. The dual-bevel functionality allows users to make beveled cuts in both directions, amplifying the tool’s adaptability for a wide range of projects.

The C 10FCE is also equipped with a laser guide system, which aids in ensuring accuracy by projecting a line on the workpiece where the cut will occur. This feature is particularly useful for achieving clean and precise cuts, reducing the likelihood of errors. Additionally, the saw boasts a large, robust table that provides ample support for larger workpieces, enhancing stability during use.

Durability is an important characteristic of the Hitachi C 10FCE. The saw features a rigid base that minimizes vibration and maximizes stability, resulting in smoother operation. The model is constructed with high-quality materials, ensuring longevity and consistent performance over time.

Safety is another key aspect integrated into the C 10FCE design. The saw includes a blade guard that covers the upper portion of the blade while in operation, protecting users from accidental contact. The electric brake system stops the blade quickly after the trigger is released, further enhancing user safety.

In conclusion, the Hitachi C 10FCE sliding compound miter saw is a feature-rich tool combining power, precision, and safety. With its reliable motor, versatile cutting angles, laser guide system, and durable construction, it stands as an ideal choice for anyone looking to tackle complex cutting tasks with confidence and accuracy. Whether for intricate trim work or larger construction projects, the C 10FCE is built to handle a diverse range of applications efficiently.
Top Page Image Contents