Hitachi C 10FCE instruction manual DON’Ts

Page 5

English

2.Always confirm that the POWER TOOL is clean before using it.

3.Always wear snug-fitting clothing, non-skid footwear (preferably with steel toes) and eye protection when operating the POWER TOOL.

4.Always handle the POWER TOOL carefully. If the POWER TOOL falls or strikes against a hard object, it might become deformed or cracked or sustain other damage.

5.Always cease operating the saw at once, if you notice any abnormality whatsoever.

6.Always confirm that all components are mounted properly and securely before using the tool.

7.When replacing the saw blade, always confirm that the rpm rating of the new blade is correct for use on this tool.

8.Always shut off the power and wait for the saw blade to completely stop rotating before doing any maintenance or adjustments.

9.Always clamp or otherwise secure the workpiece to the fence; otherwise the workpiece might be thrust form the table and cause bodily harm.

10.During miter or bevel cutting, always wait for the rotation of the blade to stop completely before lifting the saw blade.

11.Always make a trial run first before attempting any new use of the saw.

12.Always handle the saw blade with care when dismounting and mounting it.

13.Always confirm that the workpiece is free of nails or other foreign objects before beginning a cut.

14.Always keep your hands out of the path of the saw blade.

15.Always confirm that the lower guard is in the proper place before using the saw.

16.Inspect the tool power cords periodically.

17.Always confirm that the proper lengths and types of extension cords are being utilized, if necessary, before starting the tool.

18.Always confirm that the motor air vents are fully open before using the tool.

19.Always wait until the motor has reached full speed before starting a cut.

20.Always keep the handles dry, clean and free of oil and grease. Hold the tool firmly when in use.

21.Always use outboard stands to provide support for long workpieces that overhang the table of the compound saw.

22.Always operate the tool after ensuring the workpiece is fixed properly with a vise assembly.

23.The operating instructions provided with the tool shall direct the user to secure the tool to supporting structure if, during normal operation, there is a tendency for the tool to tip over, slide, or walk on the supporting surface.

DON’Ts

NEVER VIOLATE THE FOLLOWING RULES TO ASSURE SAFE USE OF THIS TOOL:

1.Never operate the POWER TOOL unless you fully understand the operating instructions contained in this Manual.

2.Never leave the POWER TOOL unattended without first unplugging the power cord.

3.Never operate the POWER TOOL when you are tired, after you have taken any medications, or have consumed any alcoholic beverages.

4.Never use the POWER TOOL for applications not specified in the instruction manual.

5.Never operate the tool while wearing loose clothing, a necktie or jewelry, or while your hair is uncovered, to protect against getting caught in the moving machinery.

6.Never reach around the saw blade.

7.Never touch any moving parts, including the blade, while the saw is in use.

8.Never remove any safety devices or blade guards; use of the tool without them would be hazardous.

9.Never lock the lower guard; always confirm that it slides smoothly before using the tool.

10.Never damage the power cord of the tool.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Advertencia AvertissementContents Important Safety Instructions for Using ALL Power Tools Important Safety InformationMeanings of Signal Words Specific Safety Rules for Use of this Power Tool DON’Ts Replacement Parts Double Insulation for Safer Operation USE Proper Extension CordName of Parts Operation and MaintenanceC10FCH SpecificationsPreparation Before Operation InstallationApplications Installing the dust bag, holder, stopper and vises Before UsingMake sure the power source is appropriate for the tool Releasing the locking pinBefore Cutting Position adjustment of laser line Only Model C10FCH Confirmation for use of sub fence …Optional accessorySwitch Laser Line Practical Applications Switch operationCutting Operation Using the Vise Assembly Standard accessoryCompound cutting procedures Miter cutting proceduresBevel cutting procedures For bevel cut setting Crown molding cutting proceduresFor miter cut setting Crown molding Stopper L and R optional accessories allow SAW Blade Mounting and Dismounting How to use the dust bag Standard accessoryCutting easily-deformed materials, such as aluminum sash Mounting the saw blade -a, -b, -c and -dInspecting the saw blade Maintenance and InspectionDismounting the saw blade Inspecting the carbon brushes and Fig Inspecting the leverAbout Handling the Motor see Fig Inspecting the screwsLubrication Service and RepairsCleaning Consignes DE Securite Relatives AUX Outils Électriques Informations Importantes DE SécuritéSignification DES Mots D’AVERTISSEMENT Français Consignes de sécurité spéciales pour cet outil électrique Français Double Isolation Pour UN Fonctionnement Plus SUR Pieces DE RechangeUtiliser LE Cordon DE Rallonge Approprié Français NOM DES Pièces Utilisation ET EntretienSpécifications Préparation Avant L’UTILISATION Libérer la goupille de verrouillage Avant L’UTILISATION’assurer que la source d’alimentation convient pour l’outil Vérifier que la gâchette est sur OFFAvant LA Coupe Une coupe stable du matériau avec une face arrière large Remarques Fonctionnement de l’interrupteur Applications PratiquesCoupe Utilisation de l’ensemble d’étau Accessoire standardProcédures de coupe mixte Procédure de coupe d’ongletProcédure de coupe de biseau Réglage d’une coupe de biseau Procédures de coupe de corniche complexeRéglage d’une coupe d’onglet ’étau B de corniche complexe accessoire en option peut Utilisation du sac à copeaux Accessoire standard Installation ET Retrait DE LA LameRetrait de la lame Installation de la lame -a, -b, -c et -dEntretien ET Inspection Remisage Service APRÈS-VENTE ET RéparationsGraissage NettoyageNormas DE Seguridad Para LAS Herramientas Eléctricas Información Importante Sobre SeguridadSignificado DE LAS Palabras DE Señalización Español Español Español Piezas DE Reemplazo Aislamiento Doble Para Ofrecer UNA Operación MÁS Segura Utilice EL Cable Prolongador AdecuadoNomenclatura DE Partes Operación Y MantenimientoMesa giratoria Dimensión máxima de corte Máxima Ingletes EspecificacionesInstalación AplicacionesPreparativos Previos a LA Operación Liberación del pasador de bloqueo Antes DE LA UtilizaciónCerciórese de que el interruptor de disparo esté en OFF Compruebe si la hoja de sierra posee defectos visiblesAntes DEL Corte Mm, como se muestra en la Fig Posición de ajuste de la línea de láser Sólo modelo C10FCHContinuación introduzca una llave de barra hexagonal de Operación de conmutación Aplicaciones PrácticasOperación de corte Procedimientos de corte compuesto Procedimiento de corte de ingletesProcedimientos de corte de ingletes Para el ajuste del corte en bisel Procedimientos de corte con moldura en vérticePara el ajuste de corte de ingletes Se muestra en la -a. Después de la in sercion, apriete el Una posición en que no haga contacto con la hoja de sierra Forma de utilizar la bolsa para el polvo Accesorio estándarMontaje de la hoja de sierra -a, -b, -c y -d Montaje Y Desmontaje DE LA Hoja DE SierraDesmontaje de la hoja de sierra Mantenimiento E InspecciónInspección de la hoja de sierra Inspección de la palancaServicio Y Reparaciones Page Page Page Page Page Page Page Page Hitachi Koki Canada Co

C 10FCE specifications

The Hitachi C 10FCE is a powerful and versatile 10-inch sliding compound miter saw designed to meet the needs of both professional contractors and serious DIY enthusiasts. Renowned for its precision and ease of use, this tool is engineered to deliver accurate cuts while offering a range of features that enhance its functionality.

One of the standout features of the C 10FCE is its 15-amp motor, which delivers a robust performance capable of cutting through a variety of materials, including hardwoods, softwoods, and engineered woods. The motor provides a no-load speed of 5,000 RPM, allowing for swift and efficient cutting tasks. The saw is equipped with a unique 0 to 52-degree miter angle range, providing versatility for making precise crosscuts at various angles. The dual-bevel functionality allows users to make beveled cuts in both directions, amplifying the tool’s adaptability for a wide range of projects.

The C 10FCE is also equipped with a laser guide system, which aids in ensuring accuracy by projecting a line on the workpiece where the cut will occur. This feature is particularly useful for achieving clean and precise cuts, reducing the likelihood of errors. Additionally, the saw boasts a large, robust table that provides ample support for larger workpieces, enhancing stability during use.

Durability is an important characteristic of the Hitachi C 10FCE. The saw features a rigid base that minimizes vibration and maximizes stability, resulting in smoother operation. The model is constructed with high-quality materials, ensuring longevity and consistent performance over time.

Safety is another key aspect integrated into the C 10FCE design. The saw includes a blade guard that covers the upper portion of the blade while in operation, protecting users from accidental contact. The electric brake system stops the blade quickly after the trigger is released, further enhancing user safety.

In conclusion, the Hitachi C 10FCE sliding compound miter saw is a feature-rich tool combining power, precision, and safety. With its reliable motor, versatile cutting angles, laser guide system, and durable construction, it stands as an ideal choice for anyone looking to tackle complex cutting tasks with confidence and accuracy. Whether for intricate trim work or larger construction projects, the C 10FCE is built to handle a diverse range of applications efficiently.
Top Page Image Contents