English
At the completion of the recondition cycle, the charger automatically recharges the battery.
Manually Terminating the Reconditioning Process
At any time during the reconditioning process of a Motorola IMPRES battery (STEADY YELLOW indication), reconditioning may be termi- nated by removing and reinserting the battery within 5 seconds. This causes the charger to terminate the reconditioning process and begin the charging process. The charger indicator changes to a STEADY RED.
Removing a Radio or Battery from the Charger
Use two hands to remove a radio or battery from the charger pocket – one hand to hold and support the charger, and the other hand to remove the radio or battery.
TROUBLESHOOTING
The IMPRES Adaptive Charger incorporates the features of:
•a universal input (100 V
•a constant current rapid charger,
•an interrupted current (negative pulse) conditioning charger
•a reconditioning unit.
The combination of the features listed above are unique in a desktop charger. Therefore, operation of the radio with a battery attached while in the charger is not recommended.
While in the charger, radio operation may result in minimally reduced radio performance and extended battery charge time.
Additionally, the conditioning charge feature of this system creates an audible “ticking” sound in the receiving radio during the rapid and trickle charge modes of operation. This sound is caused by periodic discharge pulses to the battery. Should this sound be objectionable to the user, changing the switch position located on the bottom of the
12