| Mode of | Set slide switch | How to set |
| operation: | on sensor to: | power switch: |
|
|
|
|
| Continuous Override |
|
|
| Mode (standard |
|
|
| floodlight setting) |
| Turn the power off |
| Lights should stay on | TEST | for 5 seconds then |
| continuously both day |
| back on. |
| and night (must be reset |
|
|
| manually). |
|
|
|
|
|
|
| Return to AUTO |
|
|
| or NIGHT TIME ON |
|
|
| Settings | AUTO | Turn the power off |
| (motion activated) | or | for at least 90 seconds |
| From any of the above | ALL NIGHT TIME | then back on. |
| settings | ON MODES |
|
|
|
|
|
What to do if . . .
OUTDOOR LIGHTS DO NOT COME ON WITH MOTION AT NIGHT
Is there power to the fixture?
•Check to see that the circuit breaker has not been tripped.
•Be sure the wall switch is in the ON position.
•Be sure that the bulbs are not burned out or broken.
Is the surrounding external ambient light too bright? (If so, the unit may think it’s daytime.)
•
•Relocate or reposition the unit away from the light.
TURN OFF POWER BEFORE CONTINUING.
Is the wiring to the fixture loose?
•Check wiring, and reconnect if necessary using wire nuts provided.
OUTDOOR LIGHTS COME ON FOR NO APPARENT REASON AT NIGHT
Is there motion in the detection zone?
•Make sure the sensor is not picking up moving objects such as trees, traffic, etc.
TEST FOR YOURSELF.
•Cover the sensor lens with cardboard to prevent sensor from detecting motion. If the lights stay off, something in the detection zone is triggering the sensor.
•If this is the case, reduce the sensitivity.
•Reposition motion sensor.
*If the lights stay on with sensor lens covered, contact customer service.
Is the unit in the AUTO mode?
•Make sure the unit is not in one of the two NIGHT TIME ON modes.
LIGHTS STAY ON AT NIGHT AND DO NOT TURN OFF
Is there motion in the detection zone?
•Make sure the sensor is not picking up moving objects such as trees, traffic, etc.
•If this is the case, reduce the sensitivity.
•Reposition motion sensor.
If there is no motion, then the unit may be in the override mode.
•Turn the light switch to the OFF position for 90 seconds, and then back to the ON position. This will send the unit bac k into the AUTO mode.
*If the lights continue to stay on, contact customer service.
Is the unit in the AUTO mode?
•Make sure the unit is not in one of the two NIGHT TIME ON modes.
(continued)
7