Delta 28-276, 28-206 instruction manual Accessories, Warranty, Service and Repairs

Page 25

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or replacement of parts. For information about Delta Machinery, its factory- owned branches, or an Authorized Warranty Service Center, visit our website at www.deltamachinery.com or call our Customer Care Center at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by others.

You can also write to us for information at Delta Machinery, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention: Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number, etc.)

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

WARRANTY

To register your tool for warranty service visit our website at www.deltamachinery.com.

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

25 - English

Image 25
Contents Contractors Saw Important Safety Instructions Table of ContentsSafety Guidelines Definitions Stay ALERT, Watch What YOU are DOING, and USE General Safety RulesRefer to them often Use them to instruct others Additional Specific Safety RulesPower Connections Fig. C Extension CordsFunctional Description Carton ContentsModel 28-206 Enclosed Stand Parts Model 28-276 Open Stand Parts Assembly Tools Required AssemblyAssembly Time Estimate Model 28-206 Enclosed Stand AssemblyAlign the holes in the base a , with the holes Model 28-276 Open Stand Assembly Page Attaching the Belt to the SAW and Motor Pulley Attaching the SAW to the StandAttaching the Pulley Guards Disconnect the machine from the power source Connecting Motor Cord to Switch AssemblyAttaching Blade to the SAW Table InsertOperation Locking the Switch in the OFF PositionStarting and Stopping the SAW Tilting the TableAdjusting Blade Tension Adjusting the Table StopTracking the Blade Vertical Adjustment of the Upper Blade Guide AssemblyAdjusting Lower Blade Guides and Blade Support Bearing Adjusting the Upper Blade Guides and Blade Support BearingChanging Blade Speed for Model 28-206 only Dust PortCutting Curves Troubleshooting GuideProbable Cause Probable Cause Remedy RemedyBand SAW Blades Service MaintenanceWarranty AccessoriesService and Repairs Mesures DE Sécurité Définitions LES Instructions Importantes DE SureteLA Proposition DE Californie Conservez CES InstructionsLutilisation DE CET Outil Règles DE Sécurité GénéralesConserver CES Directives Règles Spécifiques Additionnelles DE SûretéSpécifications DU Moteur Raccordements ÉlectriquesInstructions DE Mise À LA Terre Fonctionnement Monophasé À 240 Volts Cordon DE RallongeAVANT-PROPOS Contenu DU CartonDésemballage ET Nettoyage Pièces DU Socle Fermé DU Modèle Pièces DU Socle Ouvert DU Modèle Outils Nécessaires Pour L’ASSEMBLAGE AssemblageDurée Estimée Pour L’ASSEMBLAGE Assemblage DU Socle Fermé DU ModèleFrench Assemblage DU Socle Ouvert DU Modèle French Assemblage DES Protecteurs DE Poulie Assemblage DE LA Scie SUR LE SocleAssemblage DE LA Table SUR LA Scie Connexion DU Cordon Moteur À L’ENSEMBLE DE L’INTERRUPTEURAssemblage DE LA Lame SUR LA Scie Insert DE TableDémarrage ET Arrêt DE Scie FonctionnementVerrouiller L’INTERRUPTEUR EN Position D’ARRÊT Inclinaison DE LA TableRéglage DE LA Tension DE Lame Réglage DE LA Butée DE LA TableRéglage Vertical DE L’ENSEMBLE DE Guide Supérieur DE LA Lame Alignement DE LA LameDébrancher l’appareil de la source d’alimentation Goulotte À Poussière Utilisation DE L’APPAREILGuide DE Dépannage Problème LA Scie NE Démarre PAS Cause probable SolutionCoupe DE Courbes Problème LA Scie À Ruban Vibre Beaucoup Cause probableProblème LA Lame NE S’ALIGNE PAS Cause probable Problème LES Lames Cassent Cause probableLames DE Scie À Lame Ruban EntretienGarder LA Machine Propre Démarrage ImpossibleRemplacement Gratuit DE Létiquette AccessoiriesGarantie Entretien ET RéparationPautas DE SEGURIDAD/DEFINICIONES Instrucciones DE Seguridad ImportantesProposición DE California EL USO DE Esta Herramienta Normas Generales DE SeguridadNormas Específicas Adicionales DE Seguridad Guarde Estas InstruccionesEspecificaciones DEL Motor Conexiones a LA Fuente DE AlimentaciónInstrucciones DE Conexión a Tierra Fig. D1 Cordones DE ExtensiónContenido DE Carton Descripción FuncionalPrefacio Desempaquetado Y LimpiezaBase Tornillo de cabeza troncocónica M5 x 0.8 x 10 mm Lado Piezas Cerradas DEL Soporte DEL ModeloPiezas Abiertas DEL Soporte DEL Modelo Herramientas DE Ensamblaje Requeridas EnsamblajeEstimación DEL Tiempo DE Ensamblaje Montaje DE LA Base DE Soporte Cerrada ModeloNota Apriete libremente el hardware para el ajuste adicional Sobre una superficie plana Montaje DE LA Base DE Soporte Abierta ModeloPage Conectar LA Agujeros DEL Protector DE LA Polea Sujeción DE LA Sierra a LA Base DE SoporteSujeción DE LA Mesa a LA Sierra Cuerda DEL Motor QUE Conecta a LA Asamblea DE InterruptorSujeción DE LA Hoja a LA Sierra Montaje DE LA Pieza DE Insercion DE MesaArrancando Y Deteniendo LA Sierra OperaciónBloqueando EL Interruptor EN LA Posicion DE Apagado Inclinación DE LA TablaAjuste DE LA Tensión DE LA Lámina Ajuste DE LA Parada DE LA TablaAjuste Vertical DEL Montaje Superior DE LA Guía DE LA Lámina Seguir LA LáminaDesconecte la maquina de la fuente de energia Puerto DEL Polvo Utilizar LA MaquinaCorte DE Curvas Guia Localizacion DE FallasCausa probable Causa probable RemedioRemedios Localizacion DE Fallas Mantenimiento Hojas DE Sierra DE CintaMantenga LA Máquina Limpia Servicio Garantia Accesorios