Bosch Power Tools 1640VS Adjusting the Angle Indicator, Aligning SAW Blade 90º, Dust Extraction

BM 2610006360 03-09:BM 2610006360 03-09 3/18/09 1:42 PM Page 10

ADJUSTING THE ANGLE INDICATOR

If necessary, the position of the angle indicator can be re-adjusted.

Loosen the screws on the underside of the miter table attachment (approx. 1/2 turn). Also loosen the preset angle release button and locking screw if necessary. Align the saw blade of the mounted saw with the aid of a protractor or square to achieve the 0º setting. Tighten the thumbscrew to secure setting, then securely tighten the screws on the underside of the table attachment (Fig. 11).

FIG. 11	ANGLE
	INDICATOR
	ADJUSTMENT
	SCREWS

LOCKING

SCREW

ALIGNING SAW BLADE 90º

TO THE MITER TABLE ATTACHMENT

If necessary, the blade can be re-aligned to be 90º to the table. First, loosen the thumbscrew. Then align the saw blade of the mounted saw with the aid of a square. Rotate the blade alignment screw clockwise or counter- clockwise until you achieve the 90 degree setting. Then tighten the thumbscrew (Fig. 12).

FIG. 12

BLADE ALIGNMENT

SCREW

DUST EXTRACTION

The miter table attachment is equipped with a dust port for dust extraction. To use this feature, attach a vacuum hose to the dust port, and then attach opposite end to a shop vacuum cleaner (Fig. 13).

FIG. 13

DUST

PORT

-10-