Size of Cable (Unit: mm2)
Welding Cur- | Return Length | 20m | 30m | 40m | 60m | 80m | 100m |
rent |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
300A |
| 30 | 38 | 50 | 80 | 100 | 125 |
|
|
|
|
|
|
| |
250A | 22 | 30 | 38 | 60 | 80 | 100 | |
|
|
|
|
|
|
| |
200A | 22 | 30 | 30 | 50 | 60 | 80 | |
|
|
|
|
|
|
| |
150A | 22 | 22 | 22 | 38 | 50 | 60 | |
|
|
|
|
|
|
| |
100A | 22 | 22 | 22 | 30 | 30 | 38 | |
|
|
|
|
|
|
|
|
8-2 Polarity
There are two kinds of welding output terminals, 『+』and
zFollow the instruction of the welding rods, the polarity of which is specified.
| Application | Connection |
|
|
|
Normal Polarity | General Welding, | Plus to the Earth (Material) |
| such as construction | Minus to holder (Rod) |
|
|
|
Reverse Polarity | Thin Plate, Build up | Plus to holder (Rod) |
| Welding, Stainless | Minus to the Earth (Material) |
| Steel |
|
8-3 Connection – Welding Cable
Danger : Electric Shock
zBefore connecting or disconnecting a welding cable from welding output terminals, stop the engine, and remove the engine key. A person performing should always keep the key.
①Stop the engine.
② Connect a welding cable to a crimping terminal and a welding | WELDING ROD | CRIMPING | |||
| rod holder, and connect the other cable to a crimping terminal | HOLDER | TERMINAL | ||
|
|
| |||
| and a material holder. |
|
|
|
|
③ Connect the welding cables to the output terminals. |
|
|
| ||
| In terms of DGW311DM, connect cables to the welding output |
|
| ||
| terminals, referring to the table below. |
| MATERIAL HOLDER |
| |
|
|
|
|
| |
|
|
|
|
|
|
| ECO (Single) | Single | Dual |
|
|
|
|
|
|
| |
| Welding Rod | Welding Rod | Welding Rod |
| |
| φ2.0 – φ4.0 | φ2.6 – φ6.0 | φ2.0 – φ4.0 |
| |
| Welding Output Terminal A | Welding Output Terminal A | Welding Output Terminal A and |
| |
|
|
| Welding Output Terminal B |
| |
|
|
|
|
|
|
④Close the output terminal cover, after finishing connections, and fix the cover with bolts. <Caution>
z Be sure to crimp a crimping terminal to a cable and connect the cable to welding output ter-
17