Shindaiwa 4 Cycle Diesel Engine specifications 50hrs, Oil Filter Change, Clean/Change Fuel Filter

Use the hour meter as a guide for the operating time.

	Checking Items	Startup			Checking Time
		Check
			At		Every	Every	Every	Every
			50hrs		200hrs	400hrs	1000 hrs	2000 hrs
1	Check and Supply Fuel	○
2	Check and Supply Engine Oil	○
3	Engine Oil Change		1st	○	2nd or
					after ○
4	Oil Filter Change		1st	○	2nd or
					after ○
5	Check/Add Water/Coolant	○
6	Water/Coolant Change						○ or
							one year
7	Clean/Change Fuel Filter				○	○
					(Clean)	(change)
8	Drain Water from Fuel Tank
9	Check Leakage Fuel・Oil・Water	○
10	Check/Add Water Battery	○
11	Clean/Change Air Cleaner Element				○	○
					(Clean)	(change)
12	Adjust Tension V-Belt		1st	●	2nd or
					after●
13	Clean Radiator Fin					●
14	Change Hose Fuel・Radiator							● or 2
	Change Vibration-Absorbing Rubber							years
15	Adjust Engine Valve Clearance						●	●
							(Adjust)	(Adjust)
16	Check/Adjust Injection Nozzle						●
17	Check/Adjust Injection Pump							●

11.1 Oil Change

First Time	50 hour mark
2nd or after	Every 200 hours

①Remove the oil plug.

②Loosen the oil drain plug and allow the oil to drain fully.

③ Reinstall the oil drain plug.

④ Checking the oil level by the oil level gauge, add oil into the oil filler to fill up to the max level. (3.5 liter Max)

OIL DRAIN PLUG

⑤Reinstall the oil plug hand tight. <Caution>

z Refer to 『6-1 Checking Engine Oil』to select engine oil.

SIDE

DOOR

OIL

FILLER

OIL PLUG (YELLOW)

11.2 Oil Filter Change

First Time	50 hour mark
2nd or after	Every 200 hours

① Drain the engine oil fully, as describe in 『11-1 Oil Change』.

25