Caution : Electric shock
zDo not flush water onto the equipment nor operate it in the rain.
Caution : Explosion
zWhen the liquid level is below the LOWER level, never use the equipment nor recharge the battery.
zBattery may emit some combustible gas, so keep it away from fire and sparks.
Caution : Fire
zThe equipment uses Diesel fuel as a fuel. When refueling, always stop the engine and keep away from fire. Moreover, always wait until the engine cools down before refueling.
zAlways wipe any drip of Diesel fuel or lubrication oil. Do not use this equipment when a leak is found. Repair the equipment before use.
zTemperature around muffler and exhaust can get extremely high. Keep any inflammable items (such as fuel, gas, paint, etc.) away from the equipment.
zKeep any inflammable items and easily burning items away from the place in welding, because welding splashes spatters.
zAlways operate this equipment on flat surface and, at least 1 meter away from any objects (wall, box, etc.).
zDo not connect AC output to any indoor wiring.
zAlways wait until the equipment cools down, before placing any covering materials for storage.
Caution : Burns
zDo not touch the engine and muffler during operation and immediately after stopping the equip- ment, for the temperature can reach extremely high.
zWhen checking engine oil or changing oil, always stop the engine, and wait until the engine cools down. If you open either the oil gauge or the oil filter cap during operation, hot oil may cause some injury.
zBe sure to wear leather gloves, apron, shoe covers, eye protection glass(es) (mask), safety shoes, safety cap, and long sleeve shirts, because welding splashes spatters.
Caution : Injuries
zWhen lifting the equipment, always use a lift hook. Do not lift a handle, for it may cause equipment to drop due to handle breaking off.
zAlways place the equipment on a flat and stable surface, to keep the equipment from sliding. Be sure to lock the wheels for the wheeled models.
zWhen starting the engine, turn off the connected equipment and set the circuit breaker to OFF po- sition.
zDo not move the equipment during operation.
zWhen performing equipment check and maintenance, always stop the engine.
zDo not operate the equipment, if the equipment is being modified or if the parts are removed.
3