<Caution>
zIf the equipment is not leveled, you cannot obtain accurate oil level.
zDo not overfill (over H line) the engine oil. The excessive volume of engine oil may damage the engine (inside the cylinders)
■Selecting proper engine oil
Use the engine oil for Diesel engine in proper viscosity, in compliance with the ambient temperature.
UPPER LIMIT (H)
REQUIRE LEVEL
LOWER LIMIT (L)
<Caution>
zUse the API class CD grade or higher.
Viscosity and Temperature
Temperature | Over +20℃ | +10 - +20℃ | |
|
|
|
|
Viscosity | SAE30 | SAE20 | SAE10W/30 |
|
|
|
|
6-2 Checking Coolant/Water
Danger : Injuries
zClose all doors and place locks during operating this equipment, to avoid injuries by uninten- tionally touching cooling fan and fan belt.
Danger : Burns
zDo not open the radiator cap while operating this equipment or immediately after stopping the equipment, to avoid sustaining burns from hot vapor.
Caution : Burns
zDo not touch the engine and muffler during operation and immediately after stopping the equipment, for the temperature can reach extremely high.
Check to see if the coolant/water level is between FULL and LOW levels in the reservoir tank. If the coolant/water is below the LOW level, fill the tank and the radiator accordingly.
①Take out the reservoir tank to remove the cap.
② Fill up the reservoir tank to the FULL level.
③ Install the cap back and tighten, and reinstall the tank to the equipment.
①Remove the top plate.
② Remove the radiator cap.
SIDE DOOR
CAP
RESERVOIR TANK
12