Hitachi N 5008AC Adjusting AIR Pressure, Loading Staples, Stapler Operation, Stapler Must Operate

Page 11

☐THE STAPLER MUST OPERATE

(5)With the Stapler off the workpiece, pull the trigger. Depress the push lever against the workpiece.

☐THE STAPLER MUST OPERATE.

(6)If no abnormal operation is observed, you may load staples in the Stapler.

Drive staples into the workpiece that is the same type to be used in the actual application.

☐THE STAPLER MUST OPERATE PROPERLY.

ADJUSTING AIR PRESSURE

WARNING

⬤ Do not exceed 120 psi (8.3 bar 8.5 kgf/cm2).

Adjust the air pressure at recommended operating pressure 70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm2) according to the length of staples and the hardness of workpiece.

The correct air pressure is the lowest pressure which will do the job. Using the Stapler at a higher than required air pressure unnecessarily over stresses the Stapler.

LOADING STAPLES

WARNING

⬤When loading staples into Stapler,

1)do not pull trigger;

2)do not depress push lever; and

3)keep Stapler pointed downward.

(1)Pull the staple feeder backward and attach it securely to a groove of the magazine.

Groove

Staple Feeder

(2)Place the staple strip over the magazine.

Make sure that the staple strip slides freely on the magazine.

English

Staple Magazine

(3)Pull the staple feeder backward. Then, detach it from the groove of magazine and softly bring the staple back as if it were being gently pushed, avoiding any impact.

Staple Feeder

The Stapler is now ready to operate.

CAUTION:

If the staple feeder is released all of a sudden, it can return abruptly, causing deformation and/or scatter, eventually ending up in clogged staples.

Be absolutely sure to bring back the staple feeder, avoiding any impact.

STAPLER OPERATION

Read section titled “SAFETY”(pages 4 – 6).

DANGER

⬤Always wear eye protector with side shields which conforms to ANSI Z87.1 specifications.

WARNING

⬤Never point Stapler toward yourself or anyone else.

⬤Never carry with finger on trigger.

Remove finger from trigger when not driving staples.

— 11 —

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Peligro Modèle N 5008ACContents Important Information Definitions of Signal WordsSafety Keep Visitors Away Check for Live WiresNever USE in Presence of Flammable Liquids or Gases Keep Hands and Feet Away from Firing Head During USEEMPLOYER’S Responsibilities Name of Parts OperationOptional Accessories SpecificationsAccessories Standard AccessoriesLubrication Power sourceStapler Must not Leak AIR Testing the StaplerCold Weather Care Stapler Must Operate Adjusting AIR PressureLoading Staples Stapler OperationMethods of Operation Disconnect AIR Hose from Stapler Adjusting the Stapling DepthDisconnect AIR Hose MaintenanceMaintenance and Inspection Service and RepairsProblem Check Method Correction Action WHY HOWInformation Importante Definition DES Mots DE SignalisationAvertissement SecuritePorter UN Habillement Approprie Ranger LE Cloueur CorrectementMaintenir L’AIRE DE Travail Propre Eloigner LES VisiteursResponsabilites DE L’EMPLOYEUR Remarque UtilisationNOM DES Pieces Selection DES Agrafes Accessoires EN OptionAccessoires Avertissement Accessoires StandardGraissage Alimentation D’AIR’AGRAFEUSE NE Doit PAS Fonctionner Entretien PAR Temps FroidEssai DE L’AGRAFEUSE ’AGRAFEUSE Doit Fonctionner Reglage DE LA Pression D’AIR AvertissementChargement DES Agrafes Avertissement Utilisation DE L’AGRAFEUSEMethodes D’UTILISATION Toujours Porter DES Lunettes DE PROTEC- Tion Reglage DE LA Profondeur DE AgrafageDebrancher LE Tuyau D’AIR DE Lagrafeuse Débrancher LE Tuyau D’AIR EntretienEntretien ET Inspection Entretien ET Reparations AvertissementAction Pourquoi Comment Probleme Verification CorrectionDefinición DE LAS Palabras Clave Información ImportanteAdvertencia SeguridadCompruebe LA Palanca DE Empuje Antes DE LA Utilización Mantenga a LOS Visitantes Alejados11. Vístase Adecuadamente No Utilice Nunca UN Acoplador SIN Descarga CON LA GrapadoraResponsabilidades DEL Empresario Nomenclatura OperaciónAplicaciones EspecificacionesSelección DE Grapas Accesorios OpcionalesFuente de propulsión Suministro DE Aire PeligroPrueba DE LA Grapadora Peligro LubricaciónCuidados Para Climas Fríos PrecauciónLA Grapadora Deberá Funcionar Adecuadamente Ajuste DE LA Presión DE Aire AdvertenciaCarga DE Grapas Advertencia LA Grapadora Deberá FuncionarMétodos DE Operación PrecaucionOperación DE LA Grapadora Desconecte LA Manguera DE Aire DE LA Grapadora Ajuste DE LA Profundidad DE GrapadoUtilice Siempre Gafas Protectoras Para LOS Ojos Desconecte LA Manguera DE Aire MantenimientoMantenimiento E Inspección Servicio Y Reparaciones AdvertenciaAcción Para Cómo Problema Méthodo DE Comprobación SoluciónPage Hitachi Koki Canada Co

N 5008AC specifications

The Hitachi N 5008AC is an advanced horizontal machining center specifically designed to meet the demands of precision milling and heavy-duty machining operations. This cutting-edge machine reflects Hitachi's commitment to innovation and quality in manufacturing, catering to a wide range of industries including automotive, aerospace, mold and die, and general machining.

One of the key features of the N 5008AC is its robust construction. The machine incorporates a solid, reinforced casting design to minimize vibration, ensuring high stability during complex machining tasks. This structural integrity contributes to improved accuracy and surface finish, making it ideal for intricate components that require tight tolerances.

The N 5008AC is powered by a high-performance spindle that reaches speeds of up to 12,000 RPM. This spindle is equipped with an advanced cooling system which aids in maintaining thermal stability, thereby enhancing performance during prolonged machining operations. Coupled with a powerful servo motor, it provides higher torque at low speeds, making it suitable for both high-speed and heavy-duty applications.

Another notable aspect of the N 5008AC is its intelligent control system that leverages cutting-edge CNC technology. The system features advanced programming capabilities, enabling users to achieve complex multi-axis machining operations with ease. Its user-friendly interface simplifies the setup process, allowing operators to efficiently switch between different tasks and optimize machining time.

The machine also comes with a generous tool magazine that can accommodate a wide range of tooling options, promoting flexibility and efficiency. With an automatic tool changer, the N 5008AC minimizes downtime during tool swaps, maximizing productivity. Additionally, with a large work envelope, this machining center is adept at handling sizable workpieces.

In terms of technologies, the N 5008AC utilizes adaptive control features that adjust machining parameters in real-time based on cutting conditions. This smart technology not only enhances machining accuracy but also extends tool life by ensuring optimal cutting conditions throughout the machining process.

Moreover, the N 5008AC emphasizes energy efficiency, incorporating systems that reduce power consumption while maintaining peak performance. This commitment to sustainability aligns with global trends towards environmentally responsible manufacturing practices.

In summary, the Hitachi N 5008AC stands out as a versatile and powerful machining center that combines exceptional stability, advanced CNC technology, and a host of intelligent features, making it a top choice for manufacturers aiming to enhance productivity and precision.
Top Page Image Contents