Mitsubishi Electronics 882.00207.00 specifications Typical Recipe Entry Operator Screen

Page 48

Figure 33: Typical Recipe Entry Operator Screen

A typical menu is shown in the figure above. This display, which is defaulted to when the controller is turned on, provides the operator with the following information and options:

•The ability to change Recipe Values

•Accept a newly entered Recipe

•Start or Stop the blender

•Access to the Recipe Book

•Access to the Clean-out Screen

•Access to the Inventory Screen

•Access to the Controller Setup Screen

The menu tree shows the structure for a standard Slide Gate/Auger blender.

When the unit is initially installed the Manual Control menu will be used. This screen is primarily used for troubleshooting the blender. All outputs can be controlled manually and all digital inputs from the proximity switches can be viewed. Pressing the “Manual Control” key when in the “Setup” menu accesses this screen. To gain access to the “Setup” menu, a password will be requested.

Figure 34: Typical Manual Control Operator Screen

While the blending system is in operation, there are a couple of displays available to the operator. These displays are selected simply by pressing the “NEXT” key when the unit is running. The default display shown when the blender is in run mode is the Recipe Screen.

The Recipe Screen indicates by feeder number, the amount of material metered into the weigh hopper assembly by that particular feeder. This display is updated after each component dispenses its

882.00207.00

Chapter 4: Operation

47 of 102

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Gravimetric Slide Gate Batch Blender Mitsubishi Controller Parts and Service Department Unpacking and Inspection Event of Shipping DamageIf the Shipment is Not Complete If the Shipment is Not CorrectWarranty Returns ReturnsCredit Returns Table of Contents Maintenance Customer Responsibilities Technical Specifications How to Use This Manual Safety Symbols Used in this ManualSafety Tags and Warning Labels Description Follow all Safety Codes Wear Safety Glasses and Work GlovesResponsibility General ResponsibilityOperator Responsibility Remember Maintenance Responsibility Reporting a Safety DefectAccessories Customer ServiceModels Covered in This Manual General DescriptionEquipment Specifications Typical Features and Components Mechanical FeaturesController Features System Component Description Supply HoppersSlide Gates Typical Slide Gate Assembly Weigh HopperTypical Weigh Hopper Assembly Mix Chamber Operator Control Panel DisplayController Pushbuttons & Touchscreen Tags Button Function Typical Operator Screens Typical Setup Screens 882.00207.00 Functional Description Optional Components Pneumatic Slide Gate below MixerLow Level Sensors Mezzanine and Floor StandsRegrind Auger Metering R.A.M. Hopper Additive Feeder HopperTake-off Compartments Safety Features Safety Circuit StandardsSafety Device Lock-Outs Fail Safe OperationElectrical Disconnect Plug Twist Cap Plug Connected to Each Feeder Auger MotorElectric Safety Interlock Switch Electrical Safety Interlock Switch Located on mixer doorMechanical Installation Uncrating the EquipmentMounting Configurations Site RequirementsMachine Mount Mezzanine Mount Typical Mezzanine Mounted Batch BlenderFloor Mount Central Blender Typical Floor Mount Central Blender LayoutElectrical Connections Pneumatic ConnectionsInitial Set-up Mechanical Set-upStroke Limiters for Metering Gates Weigh Hopper Final Connections Display Main Recipe Screen Controller Set-upBlender Controller Menu Structure Recipe Page StartBlender Calibration Display Calibration Menu Screen Alarm Setup Feeder Calibration Auger BlendersNetwork Setup Setting Date and TimeAdditional Setup Parameters Initial Startup Quick Start Procedure Start-upGeneral Operation New RecipesOperation Procedures Existing RecipesOperator Displays Typical Recipe Entry Operator Screen Typical Inventory Display Operator Screen Recipe Entry FormatsQuickset Mode Most common in injection molding Recipe Format MenuExample Calculations of a 5-component blend in Quickset mode Recipe Setup Typical Batch Sizes Blender Batch Size lbs Inventory ShutdownMixer and Dump Setup Re-Mix Timer Weigh Hopper Dump Delay TimeWeigh Hopper Dump Time Alarm Flags Weigh Hopper Dump CycleMixer Dump Time Hopper 1-6 Out of MaterialMax Hopper Weight Exceeded, Check Batch Size Calibration Error, Clean out Hopper and Check CalibrationPower Interruption while metering a Batch PLC Battery Low Blender Powered On/OffInventory Cleared Stop ScreenFeeder Clean Out Diagram in -5 of this manual Recipe BookDisplay Recipe Contents Save Running Recipe to the BookLoad a Saved Recipe from the Book Erase Recipe or Entire Book Color ChangesShut-down Typical Inventory Shutdown Operator ScreenPreventative Maintenance Schedule Sample Preventative Maintenance SchedulePreventative Maintenance Corrective MaintenanceElectrical Internal Components of the Control PanelInput Signals to Programmable Controller Output Signals from Programmable ControllerTroubleshooting IntroductionProblem Corrective action Problem Corrective action Controller warranty will be voided Problem Corrective action Warranty Warranty SpecificationsWarranty Restrictions Warranty LiabilitiesTechnical Specifications Equipment SpecificationsAnnex B Information Drawings and Diagrams Final AssemblyMixer Sub-Assembly Typical Mixer Assembly Parts List Hopper Sub-Assembly Typical Hopper Assembly Parts ListHopper R.A.M. Regrind Auger Metering Sub-Assembly Optional Typical R.A.M. Hopper Assembly Parts ListHopper Additive Feeder Sub-Assembly Optional Typical Additive Feeder Hopper Assembly Parts ListWeigh Hopper Sub-Assembly Typical Weigh Hopper Assembly Parts ListSlide Gate Sub-Assembly Typical Slidegate Assembly Parts ListKnife Gate Sub-Assembly HD Optional Typical Knife Gate below mixer Assembly Parts ListKnife Gate Sub-Assembly RD Optional Typical Knife Gate floor stand Assembly Parts ListTypical Mitsubishi Controller Main Parts List Control Panel LayoutBlender Spare Parts Listing Spare Parts KitsAddendum Service Supervisor Information PasswordsProgrammable Settings Factory Setup Menu Advanced Weight Options ScreenMetering Test Screen Feed Algorithm Options Screen Feed Calibration Options ScreenFeeder Setup Mechanical Options ScreenCustomer Setup Menu UnitsAlarm Log Typical Alarm Flags & Feeder Setup ScreenFactory Default Setup Parameters Report SetupLoadcell Calex Module Dipswitch Settings Mitsubishi Communications Manual General Blender InfoBlender Alarms Inventory Info Recipe Info this is Where YOU Right the NEW Recipe to Recipe Book Manipulation Alarm Number Explanation Fixed Decimal ExplanationRecording the Targets VS. Actuals for Each Batch Service Department Sales Department Technical AssistanceParts Department Contract Department882.00207.00 Appendix 102
Related manuals
Manual 103 pages 60.12 Kb

882.00207.00 specifications

Mitsubishi Electronics has always been at the forefront of innovation in the field of electronics, and one of its significant products is the Mitsubishi Electronics 882.00207.00. This device is designed for enhanced performance and reliability, providing a range of features that cater to both industrial and consumer needs.

One of the main features of the Mitsubishi 882.00207.00 is its robust design, which ensures durability in demanding environments. The device is built to withstand harsh conditions, making it ideal for industrial applications where reliability is critical. Its rugged construction means that it can operate efficiently in extreme temperatures, humidity, and other challenging conditions.

In terms of technology, the Mitsubishi 882.00207.00 incorporates advanced electronic components that enhance its functionality. This includes state-of-the-art processing capabilities that allow for quick data processing and seamless operation. The device’s integration of cutting-edge technology ensures that it meets the performance demands of modern applications while providing energy efficiency.

Another notable characteristic is its user-friendly interface. The device is designed with ease of use in mind, allowing operators to interact with it effortlessly. This ensures that even those with minimal technical expertise can operate the device effectively. The clear display and intuitive controls make it accessible for a wide range of users, facilitating smoother operations in various settings.

The Mitsubishi 882.00207.00 is also equipped with multiple connectivity options. This enables it to integrate seamlessly with other devices and systems, facilitating enhanced communication and data transfer. Whether it’s connecting to existing networks or interfacing with new technologies, the device’s versatility ensures it can adapt to evolving technological landscapes.

Additionally, the device is backed by Mitsubishi's commitment to quality and customer support. Users can expect reliable service and assistance, ensuring that they can maximize the potential of their investment.

In conclusion, the Mitsubishi Electronics 882.00207.00 stands out in the electronics market for its durable construction, advanced technology, user-friendly design, and versatile connectivity options. This makes it an invaluable tool for both industrial applications and everyday consumer use, embodying the innovative spirit that Mitsubishi Electronics is known for.
Top Page Image Contents