Contents |
|
Symbols | 6 |
Technical data | 6 |
Safety instructions | 6 |
Functional description | 9 |
Intended use | 9 |
Operation | 9 |
Settings | 10 |
Working with the machine | 14 |
Service and maintenance | 14 |
Accessories | 15 |
Disposal | 16 |
Warranty | 16 |
Symbols |
|
Vvolts
Wwatts
Aamperes
Hz hertz
~ alternating current
|
|
|
|
|
| direct current | |
|
|
|
|
|
| ||
d.c. | |||||||
| |||||||
n0 | no load speed | ||||||
|
|
|
|
|
| Class II Construction | |
.../min | revolutions or reciprocation per | ||||||
minute | |||||||
min |
| ||||||
hhour
min minutes
s seconds kg kilograms
diameter tip, hint
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Disconnect from the power supply!
3 ... The numbers in the figures in- dicate in which order you should follow the steps.
Technical data
RO90 DX FEQ | |
tric sander |
|
|
|
Power | 400 W |
Speed |
|
Eccentric motion | 3000 - 7000 rpm |
Rotex rotary motion | 220 - 520 rpm |
Sanding stroke | 3.0 mm (0.12’’) |
FastFix sanding pad | dia. 90 mm |
| (3.54’’) |
Weight (without mains | 1.45 kg (3.20 lbs) |
cable, with sanding pad) |
|
Safety class | /II |
|
|
Safety instructions
General safety instructions
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu- ture reference.
The term “power tool” in the warnings refers to your
1 WORK AREA SAFETY
a)Keep work area clean and well lit. Clut- tered and dark areas invite accidents.
b)Do not operate power tools in explosive atmospheres, such as in the presence
6