Festool PN571823, PI571823, PAC571823 Electrical Safety, Personal Safety, Power Tool USE and Care

Page 7

of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distrac- tions can cause you to lose control.

2 ELECTRICAL SAFETY

a)Power tool plugs must match the out- let. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Un- modified plugs and matching outlets will re- duce risk of electric shock.

b)Avoid body contact with earthed or grounded surfaces, such as pipes, radi- ators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for out- door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f)If operating a power tool in a damp lo- cation is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3 PERSONAL SAFETY

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influ- ence of drugs, alcohol or medication. A moment of inattention while operating pow- er tools may result in serious personal inju- ry.

b)Use personal protective equipment. Al- ways wear eye protection. Protective equipment such as dust mask, non skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal injuries.

c)Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the

tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpect- ed situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the connec- tion of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4 POWER TOOL USE AND CARE

a)Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was de- signed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or battery pack from the power tool before making any adjust- ments, changing accessories, or storing power tools. Such preventive safety mea- sures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for mis- alignment or binding of moving parts,

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Guide d’utilisation Guide d’utilisation Manual de instruccionesManual de instrucciones Page Page Page Page Safety instructions General safety instructions ContentsSymbols Technical dataPersonal Safety Electrical SafetyPower Tool USE and Care Metal processing Machine-related safety instructionsBattery Tool USE and Care ServiceIntended use Functional descriptionOperation Electronics SettingsSetting sanding motion Fig Extension CordTriangular sanding and pad change Fig Changing sanding/polishing padChanging sanding pad Fig Fine sanding eccentric motionSlat sanding pad LSS-STF-RO90 Fig Attaching sanding accessoriesObserve the following instructions Delta sanding pad DSS-GE-STF-RO90Working with the machine Attaching polishing accessoriesDust extraction Edge protector FigSystainer Service and maintenanceAccessories Sanding pad brakeDisposal WarrantyConditions of 1+2 Warranty Festool Limited WarrantyTable B Polishing Sealing High-gloss polishing Table a Coarse sanding Fine sanding SandingConsignes de sécurité Consignes de sécurité dordre gé Néral SymbolesSommaire Caractéristiques techniquesSecurite Relative AU Systeme Electrique Place DE TravailSecurite DES Personnes Utilisation ET Emploi Soigneux DE Loutil Electroportatif Utilisation ET Emploi Soigneux DES Appareils Sans FILDescription fonctionnelle Consignes de sécurité spécifiques La machineTravail sur métaux La poussière, un risque Pour la santéUtilisation en conformité avec les instructions Mise en serviceRallonge électrique Régulation électronique RéglagesRéglage du mouvement de ponça Ge Fig Changement de patin de ponçage Changement de plateau de ponça Ge/polissage FigPonçage triangulaire et changement de plateau Fig Patin de ponçage Delta DSS-GE-STF RO90- Fig Observez les consignes suivantesPatin de ponçage pour lamelles LSS STF-RO90- Fig Travail avec la machine Fixation de laccessoire de polis SageAspiration Protection pour chants Protec Tor FigAccessoires Entretien et maintenanceFrein de plateau Garantie limitée de Festool RecyclageGarantie Conditions de la garantie 1+2 ansPolissage miroir LIER, Sont Limitées À UNE Période DE Trois ANSTableau a Ponçage dégrossissant Ponçage fin Tableau B PolissagePores Plastique Lijadora excéntrica ÍndiceSímbolos Datos técnicosSeguridad Eléctrica Puesto DE TrabajoSeguridad DE Personas Trato Y USO Cuidadoso DE HERRA- Mientas Eléctricas Indicaciones de seguridad especí FicasServicio Riesgos para la salud producidos Por el polvo Tratamiento de metalesDescripción de las funciónes Tensión o frecuencia no permitida Peligro de caída Uso conforme a lo previstoPuesta en servicio AlargadorSistema electrónico AjustesRotex Cambiar la zapata Fig Cambiar el plato lijador y el plato Pulidor FigZapata delta DSS-GE-STF-RO90- Fig Fijar los accesorios de lijadoFijación de los accesorios de pulido Tenga en cuenta las siguientes adver- tenciasPeligro de lesiones AspiraciónProtección de cantos Protector Trabajo con la máquinaFreno de plato Mantenimiento y cuidadoAccesorios Garantía limitada de Festool ReciclajeGarantía Condiciones de la Garantía 1 +Tabla a Lijado basto Lijado fino Tabla B Pulir Sellado Pulido abrillantador Page Page

PN571823, PAC571823, PM571823, PI571823 specifications

The Festool PI571823 series includes a selection of innovative power tools designed for professional craftsmen and DIY enthusiasts alike. This range encompasses the PM571823, PAC571823, and PN571823 models, each uniquely tailored to meet different needs while ensuring high performance, precision, and durability.

One of the flagship features of the PI571823 series is the advanced brushless motor technology. This innovation provides greater efficiency, longer tool life, and reduced maintenance compared to traditional brushed motors. The brushless motor offers consistent power and torque, enabling users to tackle a variety of tasks with ease, from intricate woodworking to demanding renovation projects.

The PM571823 model is particularly notable for its lightweight design, making it easy to handle and maneuver, especially in tight spaces. Equipped with an ergonomic grip, it minimizes user fatigue during prolonged use. Additionally, the integrated dust extraction system helps maintain a clean workspace and reduces health risks associated with inhaling fine particles.

The PAC571823 model comes with advanced electronic controls that allow for customizable speed settings. This feature enables users to adjust the tool’s performance based on specific applications, ensuring optimal results for various materials. The electronic speed control also aids in preventing tool overload, thus extending the lifespan of the equipment.

The PN571823 model stands out with its robust build quality and high-performance characteristics. It’s designed to withstand challenging environments, making it suitable for heavy-duty tasks. The model features a reliable safety system that prevents accidental starts, enhancing user safety, especially in a busy work environment.

All models in the PI571823 series are compatible with Festool’s extensive range of accessories and attachments, allowing users to expand functionality according to their specific needs. The tools also integrate seamlessly with Festool’s Systainer storage system, promoting organization and mobility in the workshop or job site.

In summary, the Festool PI571823 series, including the PM571823, PAC571823, and PN571823 models, delivers exceptional performance, innovative technologies, and user-oriented features. These tools are built to meet the demands of professional tradespeople while providing the reliability and precision that are the hallmarks of the Festool brand. Whether for woodworking, renovation or industrial applications, the PI571823 series is designed to enhance productivity and achieve outstanding results.
Top Page Image Contents