Clarke Propane Floor Burnisher manuel dutilisation Engine Emissions and CO Safety

Page 3

ENGLISH EN

Engine Emissions and CO Safety

The purpose of this document is to provide information on:

·The potential effects of CO exposure;

·The methods to reduce the risk of CO poisoning;

·The methods used to determine the amount of potential exposure to CO produced by equipment.

DANGER: All LPG (Liquid Propane Gas) powered engines, including this engine, produce Carbon Monoxide (CO). It is a LETHAL POISON that is a colorless, odorless, tasteless, and non-irritating gas. It is produced by incomplete combustion of carbonaceous material such as propane (LPG).

Failure to provide for proper venting of CO produced during the operation of combustion powered engines may result in SERIOUS INJURY OR DEATH to the operator and those in the contaminated area.

The effects of CO can be experienced at different exposure levels, depending on the health of the individual. Conditions that affect the tolerance of the individual are smoking, age, temperature, humidity, and other conditions.

WARNING: Read and understand The Operators Manual completely before using this machine

This document explains how CO produced can be managed to reduce the risk of carbon monoxide poisoning.

All distributors, owners, and operators should be aware of the potential effects of CO and the methods used to prevent over exposure.

ALTO U.S. is dedicated to our customers, their safety, and providing information, services, and products that meet those needs.

Information provided in this document is current as of the date written November 1997.

Clarke® Operator's Manual (EN) - DC Propane Burnisher

- 3 -

Image 3
Contents Clarke Patent No ,162,771English 2 Español 18English Engine Emissions and CO Safety Document Overview Potential Effects of CO Exposure Methods to Reduce The Risks of CO Poisoning English EN PPM %CO 100,000cf Hours Operation MaintenanceofEquipment COSafetyEquipmentAvailable Operator Safety Instructions Introduction Facts About Propane Tanks Propane Safety InformationRecommended Purge Procedures Facts About LP Gas PropanePad and Pad Holder How to Operate the MachineAdjusting the Handle Oil LevelChanging the Engine Oil Maintenance And AdjustmentsPad Replacement Belt ReplacementCarb-Gard Operation Recommended 20 Hour Maintenance ItemsRecommended 100 Hour Maintenance Recommended 200 Hour MaintenanceTrouble Shooting Español ES Clarke Manual del operador ES de la bruñidora Información General del Documento Potenciales efectos de la exposición al CO Sin cambio de aire / Sin mezcla de aire Cambio de aire y difusión del COAire De aire / Sin mezcla de Cambio de aire / Bueno mezcla de aireDe air Control de la calidad del aire Promedio ponderado por tiempo de 8 horas Método Osha EspañolMantenimientodelequipo Instrucciones DE Seguridad Para EL Operador Introducción Procedimientos recomendados para purgar Información de seguridad sobre el propanoDatos sobre el gas propano líquido LPG Datos sobre los tanques de propanoDisco y soporte del disco Operación de la máquinaAjuste de la empuñadura Nivel de aceiteMantenimiento y ajustes generales Mantenimiento y ajustesInformación sobre el control de emisiones Prohibido interferir con el sistema de control de emisionesMantenimiento recomendado a las 100 horas Mantenimiento y ajustes Operación Carb-GardTareas de mantenimiento recomendadas a las 20 horas Intervalos recomendados para el cambio de aceiteResoluciòn de problemas Français FR Sécurité liée aux émissions du moteur et au CO Présentation générale du document Définition des effets du CO Effets possibles d’une exposition au COMéthode de réduction des risques d’empoisonnement au CO Renouvellement dair / Aucun brassage dair Surveillance de la qualité de l’air Français Équipement de sécurité pour CO disponible Entretien de l’équipementConsignes DE Sécurité Pour l’UTILISATEUR Introduction Procédures de purge conseillées Information de sécurité sur le propaneFaits concernant le GPL propane Faits sur les réservoirs propanePatin et porte-patin Comment utiliser la machineRéglage de la poignée Niveau d’huileÉmissions Entretien et réglagesContrôle des émissions Modification interdite du système de contrôle desFonctionnement du Carb-Gard Intervalles conseillés entre les vidangesRéglage de la pression de patin Vibrations Excessives Vérifiez les possibilités suivantes DépannageClarke Burnishers Operators Manual Propane Floor Burnisher Equipment Clarke Final Assembly 4/03 Ref # Description Qty Clarke Final Assembly 4/03 Ref # Description Qty Ref # Part No. Description Clarke Carrier Assembly and Parts List 5/04Clarke Burnishers Operators Manual Clarke Burnishers Operators Manual Clarke Burnishers Operators Manual Clarke Drive/Wheel/Casting Assembly 5/04 Clarke Burnishers Operators Manual Clarke Burnishers Operators Manual Clarke Burnishers Operators Manual Clarke Fuel Assembly 5/04 Ref # Description Qty Ref # Description Qty Clarke Engine Assembly 5/04Twin Clarke HP Engine Assembly 9/04Twin Ref # Description Qty Clarke Electrical Schematic 4/03 Customer Service Technical Service Technical ServiceAmerican Lincoln / Clarke, Madison Heights, Michigan Years for Parts and Service Labor See exceptions below Clarke Limited U.S. Warranty

Propane Floor Burnisher specifications

The Clarke Propane Floor Burnisher is an industry-leading machine designed for cleaning and maintaining various types of flooring surfaces, making it an essential tool for commercial cleaning operations. Renowned for its exceptional performance, reliability, and ease of use, this floor burnisher has become a preferred choice among facility managers and cleaning professionals.

One of the standout features of the Clarke Propane Floor Burnisher is its powerful propane engine, which ensures a consistent and efficient burnishing process. This engine provides the necessary torque to maintain high speeds, enabling users to achieve a pristine finish on a variety of hard floor surfaces, including vinyl, hardwood, and concrete. The burnisher is engineered with a low-emission, environmentally-friendly propane system, reducing its carbon footprint while delivering outstanding results.

Another key characteristic of the Clarke Propane Burnisher is its innovative design for user comfort and control. The machine is equipped with an ergonomic handle that can be adjusted to suit different operator heights, minimizing fatigue during extended use. The intuitive control panel allows for easy operation, including speed adjustments and ignition, ensuring that even novice operators can achieve professional-quality results.

The burnisher features a heavy-duty construction, designed to withstand the rigors of daily use in demanding environments. Its robust chassis provides stability and durability, while the large, high-quality pad assist in achieving a mirror-like shine. The burnisher also boasts a generous pad driver, allowing for compatibility with various pad types, giving users the flexibility to choose the best pad for their specific floor type and condition.

In terms of safety, the Clarke Propane Burnisher includes essential features such as an automatic shut-off mechanism that activates when the machine is in an upright position, preventing accidental operation. Additionally, the burnisher's design enhances visibility, helping operators navigate tight spaces with confidence.

Overall, the Clarke Propane Floor Burnisher is a versatile and powerful cleaning solution, combining advanced technology with practical features that enhance performance and user experience. Its unparalleled efficiency and ability to deliver impressive results make it an indispensable asset in any commercial cleaning arsenal. Whether for large facilities or smaller environments, this burnisher offers the dependability and results that cleaning professionals demand.