Clarke Propane Floor Burnisher manuel dutilisation Potential Effects of CO Exposure

Page 5

ENGLISH EN

Engine Emissions and CO Safety

Potential Effects of CO Exposure

·Work place/industry guidelines for CO exposure limits

·Definition of CO effects

Work place/industry guidelines for CO exposure limits

Limits for permissible exposure to CO vary substantially from region to region. City, State, and Industry require- ments should be consulted prior to use of any equipment.

The current Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) for CO is 50 ppm, as an 8-hour time weighted average (TWA). This is computed by making measurements at intervals over 8 hours, then adding the sums of the concentrations and the intervals, and dividing by 8 hours. For example:

Time

Interval

P P M

 

8:00-9:00

1 HR

100

 

9:00-10:00

1 HR

25

 

10:00-11:00

1 HR

25

 

11:00-12:00

1 HR

50

 

12:00-1:00

1 HR

50

400ppm/8HR=50ppm TWA

1:00-2:00

1 HR

50

 

2:00-3:00

1 HR

50

 

3:00-4:00

1 HR

50

 

Time intervals =

8 HR

ppm = 400

 

The current National Institute for Occupational Health and Safety (NIOSH), immediately dangerous to life and health concentration (IDLH) recommended level for CO is 1,200 ppm. NIOSH defines the IDLH exposure level as the concentration that could result in irreversible health effects or death, or prevent escape from the contaminated environ- ment within 30 minutes.

Definition of CO effects

The toxic effects of carbon monoxide in the blood are the result of tissue hypoxia (lack of oxygen). carbon monoxide combines with hemoglobin to form carboxyhemoglobin. Since CO and oxygen react with the same group in the hemoglo- bin molecule, carboxyhemoglobin is incapable of carrying Oxygen. The affinity of hemoglobin for CO is 200 to 240 times greater than for oxygen. The extent of saturation of hemoglobin with CO depends on the concentration of the gas, the quantity of inspired air and on the time of exposure. The severity depends on the state of activity of the individual and his tissue oxygen needs.

According to Harrison’s Principles of Internal Medicine 7th edition, no symptoms will develop at a concentration of 0.01% CO (100ppm) in inspired air, since this will not raise blood saturation above 10 %. Exposure to 0.05% (500ppm) for 1 hour during light activity will produce a blood concentration of 20% carboxyhemoglobin and result in a mild or throbbing headache. Greater activity or longer exposure causes a blood saturation of 30 to 50 %. At this point head ache, irritability, confusion, dizziness, visual disturbance, nausea, vomiting, and fainting can be experienced. Exposure for one hour to concentrations of 0.1% (1000ppm) in inspired air the blood will contain 50 to 80% carboxyhemoglobin which results in coma, convulsions, respiratory failure and death. On inhalation of high concentrations of CO, saturation of the blood proceeds so rapidly that unconsciousness may occur suddenly without warning.

Clarke® Operator's Manual (EN) - DC Propane Burnisher

- 5 -

Image 5
Contents English 2 Patent No ,162,771Español 18 ClarkeEnglish Engine Emissions and CO Safety Document Overview Potential Effects of CO Exposure Methods to Reduce The Risks of CO Poisoning English EN PPM %CO 100,000cf Hours Operation MaintenanceofEquipment COSafetyEquipmentAvailable Operator Safety Instructions Introduction Recommended Purge Procedures Propane Safety InformationFacts About LP Gas Propane Facts About Propane TanksAdjusting the Handle How to Operate the MachineOil Level Pad and Pad HolderPad Replacement Maintenance And AdjustmentsBelt Replacement Changing the Engine OilRecommended 100 Hour Maintenance Recommended 20 Hour Maintenance ItemsRecommended 200 Hour Maintenance Carb-Gard OperationTrouble Shooting Español ES Clarke Manual del operador ES de la bruñidora Información General del Documento Potenciales efectos de la exposición al CO Sin cambio de aire / Sin mezcla de aire Cambio de aire y difusión del CODe air Aire De aire / Sin mezcla deCambio de aire / Bueno mezcla de aire Control de la calidad del aire Promedio ponderado por tiempo de 8 horas Método Osha EspañolMantenimientodelequipo Instrucciones DE Seguridad Para EL Operador Introducción Datos sobre el gas propano líquido LPG Información de seguridad sobre el propanoDatos sobre los tanques de propano Procedimientos recomendados para purgarAjuste de la empuñadura Operación de la máquinaNivel de aceite Disco y soporte del discoInformación sobre el control de emisiones Mantenimiento y ajustesProhibido interferir con el sistema de control de emisiones Mantenimiento y ajustes generalesTareas de mantenimiento recomendadas a las 20 horas Mantenimiento y ajustes Operación Carb-GardIntervalos recomendados para el cambio de aceite Mantenimiento recomendado a las 100 horasResoluciòn de problemas Français FR Sécurité liée aux émissions du moteur et au CO Présentation générale du document Définition des effets du CO Effets possibles d’une exposition au COMéthode de réduction des risques d’empoisonnement au CO Renouvellement dair / Aucun brassage dair Surveillance de la qualité de l’air Français Équipement de sécurité pour CO disponible Entretien de l’équipementConsignes DE Sécurité Pour l’UTILISATEUR Introduction Faits concernant le GPL propane Information de sécurité sur le propaneFaits sur les réservoirs propane Procédures de purge conseilléesRéglage de la poignée Comment utiliser la machineNiveau d’huile Patin et porte-patinContrôle des émissions Entretien et réglagesModification interdite du système de contrôle des ÉmissionsRéglage de la pression de patin Fonctionnement du Carb-GardIntervalles conseillés entre les vidanges Vibrations Excessives Vérifiez les possibilités suivantes DépannageClarke Burnishers Operators Manual Propane Floor Burnisher Equipment Clarke Final Assembly 4/03 Ref # Description Qty Clarke Final Assembly 4/03 Ref # Description Qty Ref # Part No. Description Clarke Carrier Assembly and Parts List 5/04Clarke Burnishers Operators Manual Clarke Burnishers Operators Manual Clarke Burnishers Operators Manual Clarke Drive/Wheel/Casting Assembly 5/04 Clarke Burnishers Operators Manual Clarke Burnishers Operators Manual Clarke Burnishers Operators Manual Clarke Fuel Assembly 5/04 Ref # Description Qty Ref # Description Qty Clarke Engine Assembly 5/04Twin Clarke HP Engine Assembly 9/04Twin Ref # Description Qty Clarke Electrical Schematic 4/03 American Lincoln / Clarke, Madison Heights, Michigan Customer Service Technical ServiceTechnical Service Years for Parts and Service Labor See exceptions below Clarke Limited U.S. Warranty

Propane Floor Burnisher specifications

The Clarke Propane Floor Burnisher is an industry-leading machine designed for cleaning and maintaining various types of flooring surfaces, making it an essential tool for commercial cleaning operations. Renowned for its exceptional performance, reliability, and ease of use, this floor burnisher has become a preferred choice among facility managers and cleaning professionals.

One of the standout features of the Clarke Propane Floor Burnisher is its powerful propane engine, which ensures a consistent and efficient burnishing process. This engine provides the necessary torque to maintain high speeds, enabling users to achieve a pristine finish on a variety of hard floor surfaces, including vinyl, hardwood, and concrete. The burnisher is engineered with a low-emission, environmentally-friendly propane system, reducing its carbon footprint while delivering outstanding results.

Another key characteristic of the Clarke Propane Burnisher is its innovative design for user comfort and control. The machine is equipped with an ergonomic handle that can be adjusted to suit different operator heights, minimizing fatigue during extended use. The intuitive control panel allows for easy operation, including speed adjustments and ignition, ensuring that even novice operators can achieve professional-quality results.

The burnisher features a heavy-duty construction, designed to withstand the rigors of daily use in demanding environments. Its robust chassis provides stability and durability, while the large, high-quality pad assist in achieving a mirror-like shine. The burnisher also boasts a generous pad driver, allowing for compatibility with various pad types, giving users the flexibility to choose the best pad for their specific floor type and condition.

In terms of safety, the Clarke Propane Burnisher includes essential features such as an automatic shut-off mechanism that activates when the machine is in an upright position, preventing accidental operation. Additionally, the burnisher's design enhances visibility, helping operators navigate tight spaces with confidence.

Overall, the Clarke Propane Floor Burnisher is a versatile and powerful cleaning solution, combining advanced technology with practical features that enhance performance and user experience. Its unparalleled efficiency and ability to deliver impressive results make it an indispensable asset in any commercial cleaning arsenal. Whether for large facilities or smaller environments, this burnisher offers the dependability and results that cleaning professionals demand.