Area Access by User Number User # 1 | Sierra S5832SG manual

Block 9 - Partition (Area) Programming (cont.)

Area Access by User Number (User # 1 - 60)

Cmd Loc	034	035	036	037	038	039	040	041
User #	1	2	3	4	5	6	7	8
Cmd Loc	042	043	044	045	046	047	048	049
User #	9	10	11	12	13	14	15	16
Cmd Loc	050	051	052	053	054	055	056	057
User #	17	18	19	20	21	22	23	24
Cmd Loc	058	059	060	061	062	063	064	065

Comments

If common area is enabled, then area 1 must be active for each user who requires access to the common area.

Assigned user codes, if used:

System Master Code - user #1

Kidwatch Code - user #11

Options:

1 Area 1(Common Area, if enabled)

2 Area 2

4Area 3

8 Area 4

16	Area	5
32	Area	6

User #	25	26	27	28	29	30	31	32
Cmd Loc	066	067	068	069	070	071	072	073
User #	33	34	35	36	37	38	39	40
Cmd Loc	074	075	076	077	078	079	080	081
User #	41	42	43	44	45	46	47	48
Cmd Loc	082	083	084	085	086	087	088	089
User #	49	50	51	52	53	54	55	56
Cmd Loc	090	091	092	093
User #	57	58	59	60
Default	255 (CL 034), 1 (All Other Locations)
Range	1 - 255 (All Locations)

Area Masters Area 1 - user #12 Area 2 - user #16 Area 3 - user #20 Area 4 - user #24

Maid Codes Area 1 - user #13 Area 2 - user #17 Area 3 - user #21 Area 4 - user #25

Area 5 - user #28 Area 6 - user #32 Area 7 - user #36 Area 8 - user #40

Area 5 - user #29 Area 6 - user #33 Area 7 - user #37 Area 8 - user #41

64 Area 7

128 Area 8

Relay Activation Codes

Area 1 - user #14	Area 5 - user #30
Area 2 - user #18	Area 6 - user #34
Area 3 - user #22	Area 7 - user #38
Area 4 - user #26	Area 8 - user #42
Duress Codes
Area 1 - user #15	Area 5 - user #31
Area 2 - user #19	Area 6 - user #35
Area 3 - user #23	Area 7 - user #39
Area 4 - user #27	Area 8 - user #43

Keypad Assignments to Areas (Keypads 1 - 16)

Cmd Loc	094	095	096	097	098	099	100	101
Keypad #	1	2	3	4	5	6	7	8
Cmd Loc	102	103	104	105	106	107	108	109
Keypad #	9	10	11	12	13	14	15	16
Default	1 (All Locations)
Range	0 - 9 (All Locations)

Comments

Each keypad may be assigned to any area (partition) or designated as a Common Key- pad.

NOTE: Only Alphanumeric keypads may be designated as Common Keypads.

Options:

0Disabled

1 Area 1

2 Area 2

3 Area 3

4 Area 4

5 Area 5

6 Area 6

7 Area 7

8 Area 8

9 Common Keypad

First to Open/Last to Close Enable

Comments

Options:

Cmd Loc

Default

Range

110

1 - 2

If enabled (programmed as 2), the first user to disarm any	1	No
area will send an opening report to the central station. The	2	Yes

last user to arm any area will send the closing report. The user must be authorized to send opening/closing reports (Block 1, CL 021 - 080).

Area Assignments (SpreadNet Keypads 1 - 8)

Cmd Loc	111	112	113	114	115	116	117	118
Keypad #	1	2	3	4	5	6	7	8

Default	0 (All Locations)
Range	0 - 255 (All Locations)

Comments

If the system is divided into areas, this option deter- mines the area(s) associated with each SpreadNet SN990-KEYPAD. SpreadNet keypads arm and dis- arm all assigned areas at the same time. The value programmed into the specific location is the total of all areas the keypad will be able to access. To send a Panic report from a SpreadNet keypad, the Police Soft Zone (Block 2, CL 156) must also be enabled.

Options:

0Disabled

1 Area 1

2 Area 2

4 Area 3

8 Area 4

16Area 5

32Area 6

64Area 7

128 Area 8