Sharp FP-N40CX operation manual Features, Filter Maintenance, Contents

ENGLISH

FEATURES

Plasmacluster Ion Control

The unit controls the ratio of negative ions and positive ions depending on the con- dition of the room.

• Clean Mode

Approximately the same numbers of posi- tive and negative ions are discharged.

• Ion Control Mode

Plenty of negative ions exist in natural surroundings such as waterfalls or forests. In this mode, negative ions will be re- leased in an increased rate, in order to bring the room air close to this natural environment.

• AUTO Plasmacluster Ion Mode

The unit will switch between Clean Mode and Ion Control Mode automatically de- pending on the amount of impurities in the air detected by the dust and odor sensor.

• Filters

1)Pre-Filter

It collects large particles.

2)Washable Active Carbon Filter

Its deodorizing performance can be maintained by washing.

3)True HEPA (High Efficiency Particulate Air) Filter with anti- bacterial Apatite Filter

High-efficiency particle collection in- cluding pollen and dust.

FILTER MAINTENANCE

Some odor ingredients absorbed by the filters may become separated and may be discharged through the air outlet and result in additional odor.

Depending on the usage environ- ment, the air outlet odor may become strong after several months.

In this case, clean the Washable Ac- tive Carbon Filter. (Refer to E-14)

If this odor persists, this is because the odor components absorbed by the HEPA Filter have come off the filter. Purchase the optional filter FZ- N40HFU and replace the original fil- ters.

CONTENTS

• FOR YOUR PROTECTION (U.S.)	E-2
• CONSUMER LIMITED WARRANTY (U.S.) . E-3
• FOR YOUR PROTECTION (CANADA)	E-4
• LIMITED WARRANTY (CANADA)	E-5
SAFETY PRECAUTIONS	E-6
• RISK OF ELECTRIC SHOCK	E-6
• CAUTIONS CONCERNING THE	E-7
OPERATION OF THIS PRODUCT
• REMOTE CONTROL LIMITATIONS	E-7
• INSTALLATION GUIDELINE	E-7
• FILTER GUIDELINES	E-7
PART NAMES	E-8
• MAIN UNIT DISPLAY	E-8
• BACK	E-9
• ACCESSORIES	E-9
• MOUNTING THE STAND	E-9
PREPARATION	E-10
• FILTER INSTALLATION	E-10
• INSERTING BATTERIES	E-10
IN THE REMOTE CONTROL
• REMOTE CONTROL USE	E-11
OPERATION	E-12
• MAIN UNIT OPERATION	E-12
• REMOTE CONTROL OPERATION	E-13
CARE AND MAINTENANCE	E-14
• WASHABLE ACTIVE CARBON	E-14
FILTER CARE
• FILTER CLEANING	E-15
• MAIN UNIT	E-16
• ODOR SENSOR	E-16

•FILTER REPLACEMENT

GUIDELINES ............................................ E-17

OPERATION GUIDE	E-18
TROUBLE SHOOTING	E-19
SPECIFICATIONS	E-20

Thank you for purchasing the SHARP FP-N40CX. Please read this manual carefully for the correct usage information. Before using this product, be sure to read the section: “Safety Precautions.” After reading this manual, retain it in a conven- ient location for future reference.

This product is for household use only.

ENGLISH

E-1