Sharp FP-N40CX Preparation, Filter Installation, Inserting Batteries in the Remote Control

PREPARATION Be sure to remove the power plug from the wall outlet.

FILTER INSTALLATION

To maintain the quality of the filters, they are placed in the main unit within plastic bags. Be sure to remove the filters from the plastic bags before using the unit.

1 Filters Removal

1 Place the unit facing up

Lay the unit on a flat surface such as a table, making sure that the stand does not contact the surface.

Place so that stand does not touch surface.

Soft cloth Table, etc.

1

2 Remove the Front Panel

Press in the hook on the bottom of the Front Panel and lift to re- move.

2

1Hook

Front Panel

2

1

Pre-Filter

3 Remove the Pre-Filter, and then re- move the Washable Active Carbon Fil- ter (black) and True HEPA Filter (white) from the plastic bags.

The Washable Active Carbon Filter is reinforced with cardboard to prevent it losing its shape.

Washable Active Carbon Filter

INSERTING BATTERIES IN THE REMOTE CONTROL

1 Remove the back cover

Press and slide the back cover to re- move.

2 Insert batteries Insert batteries with and as shown

below.

3 Closecover the back

Battery Information

•The batteries for this remote control are for ini- tial use only . Change the batteries when nec- essary.

•Incorrect usage of the batteries may cause bat- tery fluid leakage and/or damage.

Take care of the following when handling:

•When replacing the batteries, replace both bat- teries with new ones of the same type. (Use 2 AA manganese batteries.)

•When not using the unit or remote control for an extended period, remove the batteries. (This prevents malfunction of the remote control from battery fluid leakage.)

•The batteries of the accessory are for initial use only and may be depleted within 1 year.

E-10