7 : Juice fruits (depending on model)
ACCESSORIES USED:
•Fruit juicer assembly (j).
•Bowl (b3).
FITTING THE ACCESSORIES:
•Fit the bowl (b3) onto the motor unit (a) and lock it in place.
•Slide the drive pin (j2) onto the motor unit drive (a1).
•Place the basket (j3) onto the bowl and lock it in place.
•Fit the cone (j1) onto the basket funnel (j3).
•To remove the fruit juicer assembly: release the basket assembly from the motor unit.
STARTING AND TIPS:
•Cut the fruit in half and hold in place on the cone (j1).
•Turn the speed selector (a3) to position 1 to start.
You can get up to 0.6l of fruit juice without emptying the bowl.
• Caution: you must rinse the basket every 0.2l.
GB
8 : Storage of the accessories
•
•After putting the accessories inside, slide the storage drawer (i) inside the motor unit (a).
9 : Finely chopping small quantities (depending on model)
ACCESSORIES USED:
•Chopping assembly.
•Finely chop in seconds: dry apricots, dry figs, cored prunes:
quantity/maximum time: 40g/6 seconds.
Cleaning
•Unplug the appliance.
•To make cleaning easier, rinse the accessories each time after use.
•Wash and dry the accessories: they are dishwasher proof.
•Pour hot water with a few drops of washing up liquid into the blender jug (h3). Close the lid (h2), with the measuring cap (h1) fitted. Press the pulse button a few times. Unplug the appliance. Rinse the jug.
•Do not immerse the motor unit (a) in water, or place it under running water. Wipe it with a damp sponge.
•The blades of the accessories are very sharp. Handle them with precaution. Tip:Ifyouraccessoriesarestainedbyfood(carrots,oranges…),wipethemwithaclothsoakedwithcookingoil, then clean as usual.
33