Description
| a | Motor unit | b | Chopping bowl assembly |
|
| a1 : Motor unit slow speed |
| b1 : Food pusher with measuring guide |
|
| a2 : Motor unit fast speed |
| b2 : Funnel lid |
|
| a3 : Speed selector: Pulse position |
| b3 : Bowl |
|
| (intermittent operation) | c | Drive pin |
GB | ACCESSORIES DEPENDING ON MODEL: |
|
| |
d | i | Storage drawer | ||
| e | Emulsifying disk | j | Fruit juicer |
| f | Vegetable cutter inserts |
| j1 : Cone |
|
| j2 : Fruit juicer drive pin | ||
|
| A : Fine grater |
| |
|
|
| j3 : Basket | |
|
| D : Fine slicer |
| |
|
| k | Spatula | |
|
| C : Coarse grater | ||
|
| l |
| |
|
| G : Pamesan grater | Blender stick |
H : Thick slicer
E : Chip cutter
gInsert supports for vegetable cutter inserts
hBlender jug
h1 : Measuring cap
h2 : Lid
h3 : Bowl
First use
•Before using for the first time, wash all parts of the accessories in hot soapy water (see cleaning paragraph). Rinse and dry.
•Place the motor unit (a) on a flat, clean and dry surface.
•Plug in your appliance.
•Pulse(intermittentoperation):turntheknob (a3) tothepulseposition,pressingsuccessivelyforbettercontrol of certain preparations.
•Continuous operation: turn the knob (a3) to position 1 or 2.
•Stop: turn the knob (a3) to position 0.
The paragraphs are numbered to match the numbering of the illustrations.
1 : Fitting the chopping bowl and the lid
ACCESSORIES USED:
• Bowl assembly (b).
FITTING THE ACCESSORIES:
•Fit the bowl (b3) onto the motor unit (a), with the bowl handle positioned slightly to the right of the knob.
•Lock the bowl (b3) by turning it towards the right.
•Fit the lid (b2) onto the bowl (b3). Lock the lid in place by pushing it towards the right of the bowl handle. The bowl must be locked onto the motor unit (a) before locking the lid (b2) onto the bowl (b3).
2 : Removing the chopping bowl and the lid
•Release the lid by turning it in a clockwise direction to free it from the bowl handle. You can then lift and remove it.
•Release the bowl by turning it in a clockwise direction.
•It is only now that you can lift and remove the bowl from the motor unit.
30