3 Load cards
For information about loading flexible and rigid cards, see the following topics.
•Load flexible cards into the document feeder
•Load a card into the card slot
Load flexible cards into the document feeder
Use the document feeder to scan flexible items such as paper and small, flexible cards. (Use the card slot to scan rigid items such as laminated cards and embossed cards.)
This topic describes the specifications for flexible cards. For paper specifications, see Load cards.
The scanner document feeder can process flexible cards that meet the following specifications:
Minimum size: | 50.8 mm x 73.7 mm (2.0 inches x 2.9 inches) | |
|
| |
Maximum size: | Business card size | |
|
|
|
Minimum weight: | 253 g/m2 | (12 points or 102 lb) |
|
|
|
Maximum weight: | 326 g/m2 | (15 points or 120 lb) |
|
|
|
The card capacity of the document feeder is 10 flexible cards.
NOTE: Cards with raised characters must be placed into the card slot. For information, see Load cards.
CAUTION: Before placing an item in the document feeder, make sure that the item does not contain wet glue, correction fluid, or other substances that can be transferred to the interior of the scanner.
Make sure there are no curls, wrinkles, staples, paper clips, or any other attached material. Sheets should not be stuck together.
Load cards | 13 |