HP LH 6000 Main Menu, Power Supply LEDs, Green LED Indicates this HP NetServer Status, LAN LEDs

Chapter 1			General Information
		Light Pipes Display PCI LEDs
PCI Hot Plug LEDs (Internal)
Amber	Green	Status Indicated	Your Action
Off	On	Power to the slot is on, and the slot is	Do not remove the board from the slot.
		operating normally.
On	On	The slot needs attention, but power	Do not remove the board from the slot.
		to the slot is on.
On	Off	The slot needs attention, but power	You can safely remove the board from this
		to the slot is off.	slot.
Off	Off	Power to the slot is off.	You can safely remove the board from this
			slot.

Power Supply LEDs

Interpret the green LEDs on the power supplies in this way:

Green LED	Indicates this HP NetServer Status:
Steady Green	The system is powered up.
Flashing	The system is in stand-by or power-save mode.
Off	The AC line is unplugged or the power supply has failed.

LAN LEDs

The LH 6000 has two LEDs on either side of the RJ-45 connection. Interpret the LEDs in this way:

Local Area Network LED Status

Green LED	Yellow LED	LAN Status:
On/Flashing	Off	The LAN is connected and data is being transferred at 10Mbps.
On/Flashing	On	The LAN is connected and data is being transferred at 100Mbps.
Off	Off	The LAN is not connected or is not operational.

Main Menu

This is the status screen default display for the LH 6000:

HP NetServer

LH 6000

1. To reach the main menu from this default screen, press the Enter button.

NOTE The status screen displays two lines of an entire menu at a time.

This is the entire Main Menu:

***Main Menu****

>Event Log >FW Info >System Info >Component Info >Service >Adjust Contrast

14