HP LH 6000 manual Removing Covers Rack Mount LH6000r, Thumbscrew

Chapter 1 General Information

Top Cover

Thumbscrew

Thumbscrew

Left Cover Right Cover

Thumbscrew

HP NetServer LH 6000 Covers

Removing Covers - Rack Mount LH6000r

WARNING Before removing covers, disconnect the power cords and unplug telephone cables. If possible, shut down the operating system. Disconnect the power cords to avoid exposure to high energy levels that may cause burns when parts are short-circuited by metal objects, such as tools or jewelry. Disconnect telephone cables to avoid exposure to shock hazard from telephone ringing voltages.

Wear a grounded wrist strap and use a static-dissipating work surface when handling NetServer components. Note that the power switch does not turn off the standby power. Disconnect the power cords to turn off standby power.

NOTE If the backlight of the LCD is on, standby power is also on.

1. Extend the anti-tip foot from under the front of the rack.

WARNING This anti-tip device must be extended to prevent the rack and NetServer from tipping over, which could damage the NetServer and injure people.

3