2 System Information
Boot Priority
Some boards have preferred slot locations. Consider the boot order when choosing the accessory board slot in which to install the accessory board.
This is the default boot priority for the LH 6000/6000r:
1.IDE
2.Flexible disk drive with a bootable flexible disk
3.HP NetRAID controller or integrated Embedded SCSI controller
4.PCI boards in slots in the following order: 8, 7, 6, 5, 4, 3, 2, and 1 Change this boot order using the Setup utility.
IRQ Settings
The BIOS automatically assigns the IRQs (hardware interrupts) for each PCI slot and embedded device in the HP NetServer during boot. These assignments trigger the NOS to enable the APIC (Advanced Programmable Interrupt Controller). APIC takes advantage of the expanded set of
These automatic IRQ assignments can be changed in the setup screen (F2).
Connector Pinouts
Unless otherwise noted, the following features apply to all models. Some features are factory installed; others are optional.
Video Connector Pinouts
The
6 |
|
|
|
|
|
|
1 |
|
|
|
| 11 | |
7 |
|
|
|
| ||
|
|
| ||||
2 |
|
|
|
| 12 | |
8 |
|
|
|
| ||
3 |
|
|
|
| 13 | |
9 |
|
|
|
| ||
4 |
|
|
|
| 14 | |
10 |
|
|
|
| ||
|
|
|
|
| 15 | |
5 |
|
|
|
| ||
|
|
|
|
| ||
|
|
|
Video Connector Pinouts
17