HP CM4730 manual 6Diagnostics, Toner is less than 100%

Table 2-6Diagnostics Page (continued)

Callout	Area on the screen	Information or capability that the area provides
		Color plane registration occurs when new print cartridges are installed to compensate
		for any slight variations that might occur in cartridge circumference.
		DMAX is a density calibration of each print cartridge color at 100% coverage; DHALF
		is also a density calibration of each print cartridge color, but as a halftone instead of
		a full color. During halftone printing, the dots of toner are spread out, and coverage of
		the toner is less than 100%.
3	Color Density	Lists the cyan, magenta, yellow, and black (CMYK) values for highlights, midtones,
		and shadows.
4	Parameters	For color devices, specific engine settings related to the printing or
		electrophotographic process are critical in identifying device status and function. The
		electrophotographic parameters, which are used to detect, diagnose, and track print-

quality defects, appear in a 272-cell binary array that contains the settings registered by the device engine. These registers also appear at the bottom of the Diagnostics Page screen.

Information

ENWW Diagnostics Page 19