HP CM4730 Security screen, Set Password, Link. For more information, see Login and logoff

Security

The following illustration and table describe how to use the Security screen.

Settings

Figure 3-8	Security screen
Table 3-6 Security
Callout	Area on the screen	Information or capability that the area provides
1	HP EWS tabs and menus	For more information, see Navigating through the HP Embedded Web
		Server.
2	Set Password	Set an administrator password to control who can gain access to the EWS
		Settings, Digital Sending, and Networking tabs. After the password has
		been set, users are prompted to type a password when they click the Log
		In link. For more information, see Login and logoff.
		To clear a password, remove the characters from the New Password field,
		leave the Verify Password field empty, and click the Apply button.
3	Set Options	Use this section to set the following options for the device.
		● Display Color Usage Job Log Page on Information Tab
		● Display Print Page on Information Tab
4	Display On Device Status	Select the control-panel buttons that you want to appear on the Device
	Page	Status screen (on the Information tab).

38 Chapter 3 Configuring the product from the Settings screens ENWW