HP CM4730 manual Select Language, Settings tab

Table 5-1Network Settings (continued)

Callout	Area on screen	Information or capability that the area provides
2	Select Language	Select the language for the Networking tab. The list of languages that are available
		in the Networking tab is not identical to the list of languages that are available in
		the Settings tab.
3	Help	Click ? for more information about the options on the Networking tab.

Depending on your HP Jetdirect print server model and operating version, the following are some tasks that you can perform from the Networking screens:

●Change network configuration settings for various types of network connections.

●Turn on or turn off management protocols.

●Set up a support contact and support URLs.

●Set a password to control access to the product and network configuration settings. This password is synchronized with the password that you set on the Security screen under the Settings tab, so you may set or reset it from either screen.

●Configure the security of your product through the use of passwords, access lists, and management protocols.

●View general network status information, including network statistics that are stored on the print server, for network troubleshooting or optimization.

●View protocol information for all supported network connections.

●Open the HP Jetdirect Configuration page.

●Set the frequency at which the HP EWS checks the network status.

For more information about the Networking screens, see the following sources:

●Help. On each Networking screen, a ? link provides a description of the networking features. Also, from the Help screen you can gain access to additional help from the HP Web site.

●HP Jetdirect Administrator's Guide. This guide is normally available on the software CD that came with your product and can be downloaded from the hp.com support pages for your product available on the following Web site.

www.hp.com/support/CLJCM4730mfp

Networking

ENWW Overview 99