HP CM4730 manual Direct Ports check box

Information

Table 2-2Configuration Page (continued)

Callout	Area on the screen	Information or capability that the area provides
4	Memory	Lists the memory information, PCL Driver Work Space (DWS), and
		resource saving information.
5	Security	Lists the status of the control-panel lock, disk write-protect options, and
		direct-connect (USB or parallel) ports.
		You can change the status of the Direct Connect ports on the Security
		screen under the Settings tab by selecting or clearing the Disable
		Direct Ports check box.
6	Paper Trays and Options	Lists the size and type of media that is specified for each of the trays in
		the product. If a duplexing unit or any paper-handling accessories are
		installed on the product, information about those devices is also listed
		here.
7	Calibration Information	Lists the last color-plane registration (CPR) page count, the last CPR
		page-count date, the last page count (in engine cycles) for DMAX/
		DHALF, and the last DMAX/DHALF page-count date.
		Color plane registration occurs when new print cartridges are installed
		to compensate for any slight variations that might occur in cartridge
		circumference.
		DMAX is a density calibration of each print cartridge color at 100%
		coverage; DHALF is also a density calibration of each print cartridge
		color, but as a halftone instead of a full color. During halftone printing,
		the dots of toner are spread out, and coverage of the toner is less than
		100%.
8	Color Density	Lists the cyan, magenta, yellow, and black (CMYK) values for highlights,
		midtones, and shadows.

12 Chapter 2 Viewing product status from the HP EWS Information screens ENWW