WARNING: Any water that drains around the HP POD causes a potential slip hazard. Use caution where slip hazards are present.
Water from natural condensation might form. Condensation from the heat exchangers flow to the three condensate drains across the rear of the HP POD (1). The water main drain catches any water from a water main leak (2). The humidifier drain removes excess moisture from the air (3).
Item
1
2
3
Component
Heat exchanger condensate drains
Water main supply/return drain
Humidifier drain
IMPORTANT: You might have to pipe directly to your local storm or sanitary drain, depending on local jurisdiction.
If your HP POD is located indoors, you can connect to an external drain line. If your HP POD is located outdoors, the drained water will simply drip from the HP POD drains out the back of the HP POD.
HP recommends connecting the condensate drains on the HP POD to a facility drain to prevent collection of water near the HP POD.
Leak detection
If too much water accumulates in a drain tray, an alarm is triggered and sent through the BMS, indicating that there might be a leak. For more information about alarms, see BMS alarms (on page 41).
Cooling system 29