Appendix A: HP site assessment
HP POD 240e NA site assessment checklist
During a survey of the readiness of a proposed customer site for the HP POD 240e NA, the site is inspected for the following:
•Accessibility of machinery for the transportation and installation of the HP POD 240e NA
•Assessment of the suitability of the site infrastructure for installing the HP POD 240e NA and for supporting infrastructure preparation and serviceability requirements
HP responsibilities
Item | Description |
| Yes | No | N/A | Initial |
| ||
|
|
|
|
|
|
|
| ||
1. Engagement plan | Develop an engagement plan with specific requirements |
|
|
|
|
|
| ||
|
| relating to the proposed installation site. |
|
|
|
|
|
| |
2. | Site visits | Schedule site visits on mutually acceptable dates, during |
|
|
|
|
|
| |
|
| normal HP business hours. |
|
|
|
|
|
| |
3. | Test equipment | Document any test equipment that is required for installation |
|
|
|
|
| ||
|
| or commissioning. |
|
|
|
|
|
| |
4. | Installation site | Review and discuss the proposed installation site: |
|
|
|
|
|
| |
review | • Physical examination of the proposed installation site. |
|
|
|
|
|
| ||
|
| • At HP's discretion, include physical measurements of the |
|
|
|
|
| ||
|
|
| area. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
5. | Indoor/outdoor | Determine if the HP POD 240e NA installation is indoors or |
|
|
|
|
| ||
installation | outdoors. |
|
|
|
|
|
| ||
6. | Site pad | Inspect the proposed installation site to be sure that the |
|
|
|
|
|
| |
|
| customer is aware of the following requirements: |
|
|
|
|
|
| |
|
| • POD load pads are in the proper location. |
|
|
|
|
|
| |
|
| • | Upon installation, the POD structure must be leveled to | ≤ |
|
|
|
|
|
|
|
| 0.5º, which can be checked at that time with a surveyor’s |
|
|
|
|
| |
|
|
| transit. |
|
|
|
|
|
|
|
| • Shimming is allowed at the load pads only. |
|
|
|
|
|
| |
|
| • Place shims in increments across the load pads to be sure |
|
|
|
|
| ||
|
|
| that there is sufficient load transfer. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
7. | Construction site | Visually inspect the construction site and identify the location |
|
|
|
|
| ||
inspection | to install the crane. |
|
|
|
|
|
| ||
8. | Staging | Be sure the following areas exist and are identified: |
|
|
|
|
|
| |
|
| • | Truck delivery |
|
|
|
|
|
|
|
| • | Staging |
|
|
|
|
|
|
|
| • | Waste removal |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
9. | Clearances | Inspect the proposed installation site to confirm the clearance |
|
|
|
|
| ||
|
| requirements are met for installing and servicing the POD |
|
|
|
|
|
| |
|
| based on the HP POD 240e NA specifications. Consider |
|
|
|
|
|
| |
|
| future planning for the space around the installation site. |
|
|
|
|
|
| |
10. Support | Evaluate the HP POD 240e NA installation site in relation to |
|
|
|
|
| |||
infrastructure | the existing and planned support infrastructure location. |
|
|
|
|
|
| ||
location |
|
|
|
|
|
|
|
| |
|
|
|
| Appendix A: HP site assessment 25 | |||||