Using Computer Setup
Information and settings in Computer Setup are accessed from the File, Security, or Advanced menus:
1.Turn on or restart the computer. When the blinking cursor appears
■To change the language, press F2.
■To view navigation information, press F1.
■To return to the Computer Setup menu, press Esc.
2.Select the File, Security, or Advanced menu.
3.To close Computer Setup and restart the computer
■Select File!Save Changes and Exit, then press Enter. or
■Select File!Ignore Changes and Exit, then press Enter.
4.When you are prompted to confirm your action, press F10.
Selecting from the File Menu
Selecting from the File Menu | |
Select | To Do This |
|
|
System information | ■ View identification information about |
| the computer, a docking base, and |
| any battery packs in the system. |
| ■ View specification information |
| about the processor, memory and |
| cache size, and system ROM. |
Save to floppy | Save system configuration settings to a |
| diskette. |
Restore from floppy | Restore system configuration settings from |
| a diskette. |
Restore defaults | Replace configuration settings in |
| Computer Setup with factory default |
| settings. (Identification information is |
| retained.) |
Ignore changes and exit | Cancel changes entered during the current |
| session, then exit and restart the |
| computer. |
Save changes and exit | Save changes entered during the current |
| session, then exit and restart |
| the computer. |
4-2 Computer Setup and Diagnostics Utilities
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Integrity Group Saved date: 05/23/00 5:02 PM
Part Number: