Home Automation SECURITY SYSTEM Emergency Keys, Fire Alarm Activated, Gas Alarm Activated, Omni

Page 14

Fire Alarm Activated

Fire Alarm Activated

When the fire alarm is activated by the smoke/fire detector(s), the alarm responds exactly as described under Burglar Alarm Activated, except:

•The console display reads, "FIRE ALARM! ZONE NAME TRIPPED".

•The sounder will activate in a 3 pulse temporal pattern to distinguish the fire alarm from the burglar alarm.

•If programmed, the in house phones are seized (disconnected) and the OmniLT begins to dial out.

The fire alarm takes priority over the burglar alarm, however, if a gas alarm is already active, it will not override the gas alarm. NOTE: If multiple alarm types occur, such as both Fire and Police, the display will alternate between the alarm types.

Gas Alarm Activated

When the gas alarm is activated, the alarm responds exactly as described under Burglar Alarm Activated, except:

•The console display reads, "GAS ALARM! ZONE NAME TRIPPED".

•The sounder will pulse on - off - on, then an extended off period to distinguish it from the burglar or fire alarm.

•If programmed, the in house phones are seized (disconnected) and the OmniLT begins to dial out.

The gas alarm takes priority over the burglar alarm, however, if a fire alarm is already active, it will not override the fire alarm.

Emergency Keys

Emergency alarm conditions can be activated through the console. These conditions (Fire, Police, and Auxiliary) are initiated with the simultaneous depression of two keys for approximately 1-second.

OMNI

POL

FIRE

AUX

NOTE: The Emergency keys are always armed. The Fire and Auxiliary Emergency alarms are silenced by pressing the ' * ' key. To cancel a Police Emergency alarm you must press the Off key and enter your code.

10

Image 14

Contents Document Number 21R00-1Rev. January Document Number 21R00-1Rev. January Copyright 2000-2006HAI All Rights ReservedCONTROL OVERALL DESCRIPTIONSECURITY SYSTEM OPERATION ContentsSETUP TELEPHONE CONTROLINTRODUCTION Underwriters Laboratories UL Listing1- OFF OVERALL DESCRIPTIONConsole Operation 2- DAY6- UP ARROW Normal Top-LevelDisplayDisplay Menus 7- CONSOLE LEDTrouble Beeps Error BeepsMain Menu To silence the beeper, press the * keyConfirmation Beep OmniLT MaintenanceCancel Time Out0 = OFF SECURITY SYSTEM OPERATIONArming the Security System 1 = DAY3 = AWAY Using Shortcut Keys2 = NIGHT 4 = VACATIONBypassing Zones 9 = RESTOREQuick Arm Restoring ZonesBurglar Alarm Activated What To Do When You Come HomeWhat Happens When the Alarm is Activated Emergency Keys Fire Alarm ActivatedGas Alarm Activated OMNIAlarm Cancel Duress Code Entered or Duress Alarm ActivatedAlarm Reset Police EmergencyMaster Code Trouble IndicationsCodes Manager Code Panic SwitchesTesting Your System User CodeCONTROL About UPBHAI Lighting Control HLC Format When set to UPB, the OmniLT controller canRoom Controller LED Indicators About RoomsAbout House Controllers When set to CentraLite, the OmniLT controller canAbout Lutron RadioRA About CentraLiteAbout When set to RadioRA, the OmniLT controller canAbout ALC House CodeControlling Units Configuring Lighting Scenes in an HLC RoomScrolling Through Names Controlling a Room of HLC LightingControlling CentraLite Units StepOperation Controlling RadioRA Units Controlling ALC or X-10UnitsScene Command Compose Timed CommandsRamp Command ALC Controlling Compose UnitsControlling Outputs Status of a UnitInternal Flags All Off All On / OffAll Lights On Scene On Command Scene CommandsScene Set Command Leviton Scene ControlUPB Links Scene Off CommandSetting a Link Lighting Scenes Activating and Deactivating LinksExecuting CentraLite Scenes ButtonsExecuting Phantom Buttons Leave for Work ButtonDinner for Two Button Temperature ControlHAI RC-SeriesThermostats For HAI heat/cool thermostats Programmable Energy Saver Modules PESMs Control actions for temperature sensors Indoor and Outdoor Temperature Freeze AlarmsIMPORTANT NOTES Upstairs 2=LOW 3=HIGH #=STATStatus Temperature AlarmsHumidity Temperature Control of AppliancesConfiguring HLC Devices Configuring HLC Devices using an Omni ConsoleStep Operation Setup Mode for HLC DevicesStep Operation Step OperationRING - RINGING ONHK - ON HOOKOFFHK - OFF HOOK DEAD - DEAD PHONE LINEEvent Log Show EventsLog Message MessagesShow Message Phone Message Clear MessageSay Message Send Message Pro-LinkPro-Linkalso has the capability to monitor the serial port for incoming text messages. When a text message is received, Pro-Linksearches through all 16 messages for a matching message. If one is found, the Program Command macro corresponding to the matching message is activated In-HousePhones TELEPHONE CONTROLTelephone Interface Remote PhonesMain Menu Phone Access Denied - Remote LockoutAlternate Method Panic Button over the Phone # # # # # # PC AccessWhen a Two-WayAudio Module is being used Recording Your AddressVoice Dialer Emergency Dial-OutDigital Dialer How the OmniLT Voice Dialer WorksWhat You Hear - If Your OmniLT Calls You Entering the Code1 = Master SETUPSet Up Codes 2 = ManagerTIME Set Up TimeSet Up Programs Duress Code1 = Add Programs 2 = Show Programs3 = Delete All Programs Times Programs Edit ProgramsEdit Programs When Control Unit / Switch Press Event Buttons Button and Event ProgramsOmniLT Corresponding Switch TableSwitch UPB 6-ButtonKeypadZone Event Buttons All On/Off Event ButtonsX-10Event Buttons Alarm Event ButtonsUPB Link Triggers Miscellaneous Event Buttons Message Event Buttons Pro-LinkProgram Control Commands Edit Program CommandSwitch Press Event Buttons CentraLite Program Button Commands Unit Toggle CommandProgram Security Commands WHEN LINK 1 ON Porch Light STATUSProgram Message Commands Program All On / All Off CommandsProgram Video Commands Edit Program ConditionProgram Time Clock Conditions Program Security Mode ConditionsProgram Zone Conditions Program Other ConditionsAnswer Outside Call Set Up DialTelephone Access Dial Type Remote CommandsRings Before Answer My Phone NumberDial Order Set Up ArmingDial Out Numbers Entry DelayAll On For Alarm Enable Quick ArmEnable Auto Bypass Exit DelayEnable Freeze Alarm Set up MiscellaneousAnnounce Alarms Flash For AlarmDESCRIPTION FORMATNUMBER House Code All OffLatitude, Longitude, and Time Zone ZONE NAMENUMBER Set Up NamesDaylight Savings DESCRIPTIONSet Up Voice Set Up Address UNDERWRITERS LABORATORIES REQUIREMENTS FIRE ESCAPE PLANNINGFEDERAL COMMUNICATION COMMISSION NOTICE HAI 21487 Bayou Ct Abita Springs, LACANADIAN INDUSTRY CANADA NOTICE UL RATINGS APPENDIX A - SPECIFICATIONSCONTROLLER OUTPUTS MAXIMUMCODE CHAR APPENDIX B - CHARACTER CODESCODE CHAR CODE CHARDESCRIPTION APPENDIX C - VOICE DESCRIPTIONSCODE CODECODE CODEDESCRIPTION DESCRIPTIONCODE DESCRIPTION CODE DESCRIPTIONPage NOTE TO INSTALLER HAI New Orleans, LA U S A