Home Automation SECURITY SYSTEM owner manual Setup Mode for HLC Devices, Step Operation

Page 38
Setup Mode for HLC Devices

Once completed, press the ' # ' key to return to the Status display and select your next unit (device). Put the next selected HLC device into Setup Mode (See - Setup Mode for HLC Devices) and then press the ' # ' key twice to configure the selected device.

Configuring HLC Devices using an OmniTouch Touchscreen

To configure HLC devices from an OmniTouch touchscreen, press the “Control” icon on the Home page. Select the desired unit from the Control list box to display the unit dialog. Put the selected HLC device into Setup Mode (See - Setup Mode for HLC Devices), and then press the “Config” button.

The display will provide you with step-by-step configuration status. Once completed, press the Exit icon.

Setup Mode for HLC Devices

To configure HAI UPB™ Wall Switches and Dimmers, put the device in Setup mode as follows:

Step Operation

1Tap the rocker switch quickly 5 times.

2The HAI UPB™ Wall Switch or Dimmer will flash the lighting load one time and blink its LED blue to indicate that it is in Setup Mode.

Note: The switch will automatically exit Setup mode after 5 minutes. To manually exit Setup mode, tap the switch quickly 2 times.

To configure the HAI UPB™ 6-Button Room Controller, put the device in Setup mode as follows:

Step Operation

1Press and hold the “ON” and “OFF” pushbuttons simultaneously for at least 3 seconds.

2All of the LED indicators will blink to indicate that the HAI UPB™ 6-Button Room Controller is in Setup Mode.

Note: The HAI 6-Button Room Controller will automatically exit Setup mode after 5 minutes. To manually exit Setup mode, press and hold the “ON” and “OFF” pushbuttons simultaneously for at least 3 seconds.

To configure the HAI UPB™ 8-Button House Controller, put the device in Setup mode as follows:

Step Operation

1Press and hold the “1” and “8” pushbuttons simultaneously for at least 3 seconds.

2All of the LED indicators will blink to indicate that the HAI UPB™ 8-Button House Controller is in Setup Mode.

Note: The HAI 8-Button House Controller will automatically exit Setup mode after 5 minutes. To manually exit Setup mode, press and hold the “1” and “8” pushbuttons simultaneously for at least 3 seconds.

Note: When OmniLT finishes configuring the device, it will automatically exit Setup mode and return to normal operation.

2 = ZONE

The Zone Status menu allows you to view and scroll through the status of each zone input. To enter the Zone menu, from the Status menu, press the 2 (ZONE) key on the console keypad. The system will display:

Front Door

SECURE

ZONE 1

↓

You may enter a zone number to start displaying the status with zone, or simply press the down arrow key to start with the first zone. The arrow keys may be used to continue scrolling between zones. For each zone, the display will show the zone name, the zone number, and the current status of the zone:

34

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Document Number 21R00-1Rev. January Document Number 21R00-1Rev. January Copyright 2000-2006HAI All Rights ReservedCONTROL OVERALL DESCRIPTIONSECURITY SYSTEM OPERATION ContentsSETUP TELEPHONE CONTROLINTRODUCTION Underwriters Laboratories UL Listing1- OFF OVERALL DESCRIPTIONConsole Operation 2- DAY6- UP ARROW Normal Top-LevelDisplayDisplay Menus 7- CONSOLE LEDTrouble Beeps Error BeepsMain Menu To silence the beeper, press the * keyConfirmation Beep OmniLT MaintenanceCancel Time Out0 = OFF SECURITY SYSTEM OPERATIONArming the Security System 1 = DAY3 = AWAY Using Shortcut Keys2 = NIGHT 4 = VACATIONBypassing Zones 9 = RESTOREQuick Arm Restoring ZonesBurglar Alarm Activated What To Do When You Come HomeWhat Happens When the Alarm is Activated Emergency Keys Fire Alarm ActivatedGas Alarm Activated OMNIAlarm Cancel Duress Code Entered or Duress Alarm ActivatedAlarm Reset Police EmergencyMaster Code Trouble IndicationsCodes Manager Code Panic SwitchesTesting Your System User CodeCONTROL About UPBHAI Lighting Control HLC Format When set to UPB, the OmniLT controller canRoom Controller LED Indicators About RoomsAbout House Controllers When set to CentraLite, the OmniLT controller canAbout Lutron RadioRA About CentraLiteAbout When set to RadioRA, the OmniLT controller canAbout ALC House CodeControlling Units Configuring Lighting Scenes in an HLC RoomScrolling Through Names Controlling a Room of HLC LightingControlling CentraLite Units StepOperation Controlling RadioRA Units Controlling ALC or X-10UnitsScene Command Compose Timed CommandsRamp Command ALC Controlling Compose UnitsControlling Outputs Status of a UnitInternal Flags All Off All On / OffAll Lights On Scene On Command Scene CommandsScene Set Command Leviton Scene ControlUPB Links Scene Off CommandSetting a Link Lighting Scenes Activating and Deactivating LinksExecuting CentraLite Scenes ButtonsExecuting Phantom Buttons Leave for Work ButtonDinner for Two Button Temperature ControlHAI RC-SeriesThermostats For HAI heat/cool thermostats Programmable Energy Saver Modules PESMs Control actions for temperature sensors Indoor and Outdoor Temperature Freeze AlarmsIMPORTANT NOTES Upstairs 2=LOW 3=HIGH #=STATStatus Temperature AlarmsHumidity Temperature Control of AppliancesConfiguring HLC Devices Configuring HLC Devices using an Omni ConsoleStep Operation Setup Mode for HLC DevicesStep Operation Step OperationRING - RINGING ONHK - ON HOOKOFFHK - OFF HOOK DEAD - DEAD PHONE LINEEvent Log Show EventsLog Message MessagesShow Message Phone Message Clear MessageSay Message Send Message Pro-LinkPro-Linkalso has the capability to monitor the serial port for incoming text messages. When a text message is received, Pro-Linksearches through all 16 messages for a matching message. If one is found, the Program Command macro corresponding to the matching message is activated In-HousePhones TELEPHONE CONTROLTelephone Interface Remote PhonesMain Menu Phone Access Denied - Remote LockoutAlternate Method Panic Button over the Phone # # # # # # PC AccessWhen a Two-WayAudio Module is being used Recording Your AddressVoice Dialer Emergency Dial-OutDigital Dialer How the OmniLT Voice Dialer WorksWhat You Hear - If Your OmniLT Calls You Entering the Code1 = Master SETUPSet Up Codes 2 = ManagerTIME Set Up TimeSet Up Programs Duress Code1 = Add Programs 2 = Show Programs3 = Delete All Programs Times Programs Edit ProgramsEdit Programs When Control Unit / Switch Press Event Buttons Button and Event ProgramsOmniLT Corresponding Switch TableSwitch UPB 6-ButtonKeypadZone Event Buttons All On/Off Event ButtonsX-10Event Buttons Alarm Event ButtonsUPB Link Triggers Miscellaneous Event Buttons Message Event Buttons Pro-LinkProgram Control Commands Edit Program CommandSwitch Press Event Buttons CentraLite Program Button Commands Unit Toggle CommandProgram Security Commands WHEN LINK 1 ON Porch Light STATUSProgram Message Commands Program All On / All Off CommandsProgram Video Commands Edit Program ConditionProgram Time Clock Conditions Program Security Mode ConditionsProgram Zone Conditions Program Other ConditionsAnswer Outside Call Set Up DialTelephone Access Dial Type Remote CommandsRings Before Answer My Phone NumberDial Order Set Up ArmingDial Out Numbers Entry DelayAll On For Alarm Enable Quick ArmEnable Auto Bypass Exit DelayEnable Freeze Alarm Set up MiscellaneousAnnounce Alarms Flash For AlarmDESCRIPTION FORMATNUMBER House Code All OffLatitude, Longitude, and Time Zone ZONE NAMENUMBER Set Up NamesDaylight Savings DESCRIPTIONSet Up Voice Set Up Address UNDERWRITERS LABORATORIES REQUIREMENTS FIRE ESCAPE PLANNINGFEDERAL COMMUNICATION COMMISSION NOTICE HAI 21487 Bayou Ct Abita Springs, LACANADIAN INDUSTRY CANADA NOTICE UL RATINGS APPENDIX A - SPECIFICATIONSCONTROLLER OUTPUTS MAXIMUMCODE CHAR APPENDIX B - CHARACTER CODESCODE CHAR CODE CHARDESCRIPTION APPENDIX C - VOICE DESCRIPTIONSCODE CODECODE CODEDESCRIPTION DESCRIPTIONCODE DESCRIPTION CODE DESCRIPTIONPage NOTE TO INSTALLER HAI New Orleans, LA U S A
Top Page Image Contents