Otherwise, a help screen is displayed:
Press # to delete or edit displayed program.↓
The first program is displayed once the down arrow is pressed. The top line displays the time or button/event that activates the program and any condition that must be true for the program to activate. The bottom line shows the command to execute when the program is activated.
10:00 PM MTWTFSS &AWAY Living Rm Lt ON
6:00 AM | 10/10 | &NIGHT |
PROGRAM | DAY |
|
WHEN AWAY:
ALL OFF
The arrow keys are used to scroll through the programs. Pressing the ' # ' key while a particular program is displayed will allow that program to be edited or deleted. The display shows:
SHOW PROGRAM 1=EDIT 2=DELETE
¾Press the 1 (EDIT) key to edit the selected program. The Edit Program menu is displayed which allows the various parts of the program to be changed - See Edit Program. Edit each part of the program as specified under Edit Program. Press the ' # ' key at the Edit Program menu to show the newly edited program. Press the ' # ' key again to save the program, or press the ' * ' key to cancel edit of this program and return to reviewing the programs.
¾Press the 2 (DELETE) key to delete the selected program.
3 = Delete All Programs
To delete All automation programs, from the Set Up Program menu, press the 3 (DELETE) key. The display will prompt you to confirm the deletion.
DELETE ALL PROGRAMS? 0=NO 1=YES
Select 1 (YES) to delete all automation control programs in the system. Select 0 (NO) or press the ' * ' key to return to the Set Up Program menu.
NOTE: IF YOU CHOOSE THIS OPTION, ALL OF YOUR PROGRAMS WILL BE LOST PERMANENTLY.
48