Home Automation SECURITY SYSTEM Normal Top-LevelDisplay, Display Menus, Up Arrow, Console Led

Page 7

6- UP ARROW

The Up Arrow key is used to scroll through menus and lists. The Up Arrow is used to scroll back through a list (for example, if you have already used the down arrow to scroll to an item, the Up Arrow will bring you back to a previous item).

7- CONSOLE LED

The Console LED is used to indicate whether the security system is currently armed or disarmed. If armed in any of the security modes, the LED will be set to red. If the system is disarmed, the LED will be set to green. The LED will flash when a Message is displayed.

8- CONSOLE DISPLAY

The Console Display is used to show the current security mode and to give useful information that will guide you through normal operations of your OmniLT control and security system.

9- CONSOLE KEYPAD

The Console Keypad is used to enter user codes for arming, disarming, bypassing, and restoring zones. In some cases, the keys (0-9) are assigned to different functions. From the top-level display, each key functions as a menu choice.

10- CONSOLE BEEPER

The Console Beeper is used to confirm a keystroke, alert user of errors and troubles, and sound upon entry and exit delays.

11- ' * ' KEY

The ' * ' Key is used to cancel and return the display to the previous menu. When you are entering a number, ' * ' will cancel the previously entered digits and will prompt you to reenter the number.

12- ' # ' KEY

The ' # ' Key is used to enter or confirm a selection. It may also be used to display a menu or to offer you additional choices.

Normal Top-Level Display

In its normal state, the console display will show the day, date, and time on the top line, and the system status on the bottom line. If all doors, windows, sensors, etc. are closed, no zones are bypassed, and if there are no troubles, the bottom line will show "SYSTEM OK" as seen below:

Mon Feb 20, 06 4:00 PM

SYSTEM OK

If one of the doors, windows, motion, or other detector connected to the OmniLT is open, or has detected motion, the bottom line of the display will say, "ZONE NAME NOT RDY".

For example, the display will say, "FRONT DOOR NOT RDY".

If the zone name has not been entered during set up, the display will give the zone number and zone type. This display will remain for 2 seconds, then the next zone not ready, in trouble, or bypassed will be displayed.

Display Menus

The system has been designed to be easy to operate. Whenever you press a key on the console, the top line of the display will indicate what you are doing. To the right of that is your selection or current setting. The bottom line will show a menu of your next options. To the lower right corner of the display is the direction arrow(s). Where possible, the up (↑), down (↓), and two- headed ( ) arrow characters are shown on the console display to indicate which arrow keys may be pressed at that time.

3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Document Number 21R00-1Rev. January Copyright 2000-2006HAI All Rights Reserved Document Number 21R00-1Rev. JanuaryContents OVERALL DESCRIPTIONSECURITY SYSTEM OPERATION CONTROLTELEPHONE CONTROL SETUPUnderwriters Laboratories UL Listing INTRODUCTION2- DAY OVERALL DESCRIPTIONConsole Operation 1- OFF7- CONSOLE LED Normal Top-LevelDisplayDisplay Menus 6- UP ARROWTo silence the beeper, press the * key Error BeepsMain Menu Trouble BeepsTime Out OmniLT MaintenanceCancel Confirmation Beep1 = DAY SECURITY SYSTEM OPERATIONArming the Security System 0 = OFF4 = VACATION Using Shortcut Keys2 = NIGHT 3 = AWAYRestoring Zones 9 = RESTOREQuick Arm Bypassing ZonesWhat Happens When the Alarm is Activated What To Do When You Come HomeBurglar Alarm Activated OMNI Fire Alarm ActivatedGas Alarm Activated Emergency KeysPolice Emergency Duress Code Entered or Duress Alarm ActivatedAlarm Reset Alarm CancelCodes Trouble IndicationsMaster Code User Code Panic SwitchesTesting Your System Manager CodeAbout UPB CONTROLAbout Rooms When set to UPB, the OmniLT controller canRoom Controller LED Indicators HAI Lighting Control HLC FormatAbout CentraLite When set to CentraLite, the OmniLT controller canAbout Lutron RadioRA About House ControllersHouse Code When set to RadioRA, the OmniLT controller canAbout ALC AboutControlling a Room of HLC Lighting Configuring Lighting Scenes in an HLC RoomScrolling Through Names Controlling UnitsOperation StepControlling CentraLite Units Controlling ALC or X-10Units Controlling RadioRA UnitsControlling Compose Units Timed CommandsRamp Command ALC Scene Command ComposeInternal Flags Status of a UnitControlling Outputs All Lights On All On / OffAll Off Leviton Scene Control Scene CommandsScene Set Command Scene On CommandActivating and Deactivating Links Scene Off CommandSetting a Link Lighting Scenes UPB LinksLeave for Work Button ButtonsExecuting Phantom Buttons Executing CentraLite ScenesHAI RC-SeriesThermostats Temperature ControlDinner for Two Button For HAI heat/cool thermostats Programmable Energy Saver Modules PESMs Control actions for temperature sensors Upstairs 2=LOW 3=HIGH #=STAT Freeze AlarmsIMPORTANT NOTES Indoor and Outdoor TemperatureTemperature Control of Appliances Temperature AlarmsHumidity StatusConfiguring HLC Devices using an Omni Console Configuring HLC DevicesStep Operation Setup Mode for HLC DevicesStep Operation Step OperationDEAD - DEAD PHONE LINE ONHK - ON HOOKOFFHK - OFF HOOK RING - RINGINGShow Events Event LogShow Message MessagesLog Message Send Message Pro-Link Clear MessageSay Message Phone MessagePro-Linkalso has the capability to monitor the serial port for incoming text messages. When a text message is received, Pro-Linksearches through all 16 messages for a matching message. If one is found, the Program Command macro corresponding to the matching message is activated Remote Phones TELEPHONE CONTROLTelephone Interface In-HousePhonesAlternate Method Phone Access Denied - Remote LockoutMain Menu Recording Your Address PC AccessWhen a Two-WayAudio Module is being used Panic Button over the Phone # # # # # #How the OmniLT Voice Dialer Works Emergency Dial-OutDigital Dialer Voice DialerEntering the Code What You Hear - If Your OmniLT Calls You2 = Manager SETUPSet Up Codes 1 = MasterDuress Code Set Up TimeSet Up Programs TIME2 = Show Programs 1 = Add Programs3 = Delete All Programs Edit Programs When Edit ProgramsTimes Programs Button and Event Programs Control Unit / Switch Press Event ButtonsUPB 6-ButtonKeypad Corresponding Switch TableSwitch OmniLTAll On/Off Event Buttons Zone Event ButtonsUPB Link Triggers Alarm Event ButtonsX-10Event Buttons Message Event Buttons Pro-Link Miscellaneous Event ButtonsSwitch Press Event Buttons CentraLite Edit Program CommandProgram Control Commands WHEN LINK 1 ON Porch Light STATUS Unit Toggle CommandProgram Security Commands Program Button CommandsEdit Program Condition Program All On / All Off CommandsProgram Video Commands Program Message CommandsProgram Other Conditions Program Security Mode ConditionsProgram Zone Conditions Program Time Clock ConditionsTelephone Access Set Up DialAnswer Outside Call My Phone Number Remote CommandsRings Before Answer Dial TypeEntry Delay Set Up ArmingDial Out Numbers Dial OrderExit Delay Enable Quick ArmEnable Auto Bypass All On For AlarmFlash For Alarm Set up MiscellaneousAnnounce Alarms Enable Freeze AlarmHouse Code All Off FORMATNUMBER DESCRIPTIONZONE NAME Latitude, Longitude, and Time ZoneDESCRIPTION Set Up NamesDaylight Savings NUMBERSet Up Voice Set Up Address FIRE ESCAPE PLANNING UNDERWRITERS LABORATORIES REQUIREMENTSHAI 21487 Bayou Ct Abita Springs, LA FEDERAL COMMUNICATION COMMISSION NOTICECANADIAN INDUSTRY CANADA NOTICE MAXIMUM APPENDIX A - SPECIFICATIONSCONTROLLER OUTPUTS UL RATINGSCODE CHAR APPENDIX B - CHARACTER CODESCODE CHAR CODE CHARCODE APPENDIX C - VOICE DESCRIPTIONSCODE DESCRIPTIONDESCRIPTION CODEDESCRIPTION CODECODE DESCRIPTION CODE DESCRIPTIONPage HAI New Orleans, LA U S A NOTE TO INSTALLER
Top Page Image Contents