Monessen Hearth CDV7 manual Optional FAN Blower Systems, Blotsc Signature Command Blower

OPTIONAL FAN BLOWER SYSTEMS

CDVSC7 & CDV7 Series Gas Fireplace

WARNING	Electrical Grounding Instructions: This
	appliance is equipped with a three-prong
	(grounding) plug for your protection against
	shock hazard and should be plugged directly
	into a properly grounded three-prong
	receptacle.
	The black and white wires on the AC box
NOTE	wiring harness are marked ‘Blower’, ‘Light’
	and ‘Aux’. It is important to use the wires
	marked ‘Blower’ or the control will not work
	correctly.

WARNING

Electrical connections should only be performed by a qualified licensed electrician. Main power supply must be turned off before connecting the fan to the main electrical power supply or performing service.

BLOTSC SIGNATURE COMMAND BLOWER
To Junction Box
In Fireplace
	Optional AC
Optional	Module
Light	{ WHITE
WHITE	BLACK
BLACK	BLACK
Optional
	{ WHITE
AUX
Blower (300w Max)	GREEN
	Connector
	Pin To Control Box
Figure 57 -
Blower Wiring Diagram
	Control Box
The BLOTSC Blower Kit requires the SCSACM A/C Mod-
ule and the TSFSC remote to install and operate this kit.
Refer to blower instructions for installation.
	FP2103

69D3011 39