Jotul Woodstove F 400 manual Installation of Jøtul F

Page 33

Ensure that the chimney or flue is structurally sound. In particular, it must not be possible for products of combustion to come into contact with combustible materials in the structure of the building.

In some situations it may be advisable to fit a flue liner prior to the installation of the stove.Your installer will advise if this is necessary.

NOTE: A guide is published by the British Flue and Chimney Manufacturers’ Association that contains general information on chimneys and flues.

If any of the pre-installation checks reveal inadequacies, do not proceed with the installation of the stove until all defects or deficiencies have been rectified.

Technical data of Jøtul F 400:

Material:

Cast iron

Finish:

Black paint and enamel

Fuel:

Wood

Log length, max.:

50 cm

Draught system:

Air wash system

Combustion system:

Secondary combustion

Flue outlet:

Top/back

Flue dimension:

150 mm dia.

Approx. weight:

158 kg

Optional extras:

Short legs

Product measures,

 

distance measures

See fig. 1

unprotected wall.

General safety precautions

Distance to wall made of flammable material and requirements for the floor plate:

Contact your local authorithy to inform you about the local codes and to ensure that your installation is safe and legal. See fig. 1.

Requirements for the floor plate: If the stove will be installed on a combustible floor, a robust, solid, non- combustible layer should cover the floor beneath the stove. This layer should cover an area of at least 300 mm in front of the stove door, and at least 150 mm either side of the opening. (See Building Regulations.) We recommend that you contact the local Jøtul dealer prior to installation.

Uninsulated flue pipe: If uninsulated flue pipes go through floors or walls, the opening must be made of brick or masonry, in such a way that the external surface of the pipe does not get closer to flammable materials than 300

mm.Isolated flue pipes may have a different distance, if necessary refer to fire technical product documentation for the flue pipe.

ENGLISH

Measures to prevent fires

Any use of the fireplace may represent some danger. Therefore, respect the following instructions:

Ensure that furniture and other flammable materials do not get too close to the fireplace. There ought to be a clear distance from the front of the fireplace of at least 600 mm.

Let the fire die. Never put it out with water as this may damage the product.

The fireplace gets warm when used and may cause burns if touched.

Ash must be properly disposed of outdoors, or emptied where it does not entail a fire hazard. Refer to local regulations.

Any stove should have a storage container made of non- flammable material as a standard accessory for the safe disposal of soot and ashes. Soot and ashes must be stored in this container for at least a week in order to be certain that the last ember has been extinguished. If the container needs to be emptied before this, add plenty of water to the container and stir.

You may want to keep the ash. It is a first class fertilizer for roses and other plants.

Installation of Jøtul F 400

Note! Check that the stove is free of any damage prior to commencing installation.

The product is heavy! Make sure you have assistance when erecting and installing it.

Foundations

If Jøtul F 400 is to be installed on a wooden floor,ensure that the floor under the stove has the dimensions to carry it.

Chimney

The stove can be connected to a masonry chimney, a brick, pre-fabricated element or a steel chimney. See separate section. Minimum chimney cross section is recommended to be 177 cm2. (Corresponding to 150 mm dia.). Connection to chimney must be done in accordance with the installation instructions from the supplier of the chimney.

Air circulation

Using a fireplace requires a plentiful supply of fresh air to the room where the product is installed. If the house is sealed, the room ought to be equipped with extra fresh air supply through vents. Avoid using mechanical fan vents in a room with a fireplace. This may cause negative pressure and draw poisonous gasses into the room. In order to avoid this, it is possible to bring in outside air directly to the stove by using an adapter (extra unit) that is mounted to the air

33

Image 33
Contents Jøtul F Check Building Codes StandardsSafety Notices InstallationTable of Contents Assembly Before Installation Chimney RequirementsMasonry Chimneys Prefabricated Chimneys Chimney HeightWall Pass-Throughs Masonry Chimney Clearance to CombustiblesHearthmount into a Masonry Fireplace Clearances to Walls and CeilingsUsing Shields to Reduce Clearances Alcove InstallationMobile Home Installation Jøtul F 400 Woodstove Clearances Corner InstallationUnprotected Surface Parallel to the WallSide Rear Corner PER NFPA211 or CAN/CSA -B365-M93Operation Break-In ProcedureUse Solid Wood Fuel Only Controls on the Jøtul FAdding Fuel MaintenanceAsh Removal Glass CareAccessories General MaintenanceOutside Air Kit #154335 Stove-Top Thermometer #Floor Bracket Kit #750304 Rear Heat Shield #25 3/4 23 1/4 29 1/2 top exit 25 1/2 rear exit 28 1/2 26 1/2 USA/Canada Draw. no USA/Canada Consult your dealer for part numbers and replacement parts Parts list for the Jøtul F 400 woodstoveAppendix a Alternate floor protectionPage Norsk Innhold Forhold til myndigheteneInstallasjon av Jøtul F Kontroll av funksjoner fig Montering av røykrørTilslutning til skorstein Vedlikehold BruksanvisningEkstrautstyr ServicearbeiderSvenska Säkerhetsregler InnehållInstallation av Jøtul F Montering av rökrör Kontroll av funktionerAnslutning till skorsten Första gångs upptändning och dagligt användandeUnderhåll Extrautrustning/tillbehör ServicearbetenTable of contents Pre-installation checksRelationship to the authorities Installation of Jøtul F Control of functions fig Assembly prior to installationMounting of flue pipe Connection to chimneyCleaning and soot removal Cleaning the glassOperating instructions Initial lighting and daily useOptional equipment ServiceTable des matieres Réglementations nationalesInstallation du poêle Jøtul F400 Mise en service Mise en service et usage courantMontage du tuyau de raccordement Raccordement à la cheminéeEntretien Revision Accessoires optionnelsComprobaciones previas a la instalación Índice de contenidoInstalación de Jøtul F Control de funciones fig Montaje previo a la instalaciónInstalación del conducto de humos Conexión a la chimeneaEncendido inicial y uso diario MantenimientoLimpieza del cristal Eliminación de la cenizaConservación Sustitución de la placa deflectora Equipo opcionalIndice generale Conformità alle leggiInstallazione di Jøtul F Montaggio del condotto Controllo delle funzioni figCollegamento alla cappa Prima accensione e utilizzo quotidianoPulizia del vetro ManutenzioneEliminazione della cenere Pulizia del camino ed eliminazione della fuliggineDotazione facoltativa RiparazioneInhalt Behördliche AuflagenAufstellen des Jøtul F Zusammenbau vor der Aufstellung Installation des AbzugsrohrsSteuergeräte Abb Anschluss an den SchornsteinInbetriebnahme und täglicher Gebrauch InbetriebnahmeInbetriebnahme Täglicher GebrauchPflege Instandhaltung Austausch der HitzeschutzplattenAustausch der Umlenkplatte Controle voor de installatie Wettelijke voorschriftenInhoudsopgave Installatie van de Jøtul F Controle van de functies afb GebruiksaanwijzingPlaatsing van de kachelpijp SchoorsteenaansluitingOnderhoud Groot onderhoud Optionele accessoiresPage Page Page Page Qualität KvalitetQuality Qualité

Woodstove F 400 specifications

The Jotul F 400 is a leading model in the Jotul line of woodstoves, renowned for its combination of efficiency, aesthetics, and robust craftsmanship. As one of the company's most popular models, it seamlessly blends functionality with timeless design, making it an ideal choice for both contemporary and traditional spaces.

One of the primary features of the Jotul F 400 is its impressive heating capacity. With an ability to heat spaces of up to 2,000 square feet, this woodstove is perfect for larger rooms or open floor plans. Its firebox can accommodate logs up to 20 inches in length, allowing for longer burn times and fewer refuels. With an average efficiency rating of around 78%, the F 400 ensures that most of the wood's energy is converted into usable heat rather than lost up the chimney.

In terms of design, the Jotul F 400 showcases the classic Norwegian aesthetic that Jotul is known for. Its cast iron construction not only contributes to its durability but also aids in heat retention, ensuring that the stove continues to radiate warmth long after the fire has diminished. The intricate detailing and optional enamel finishes give it an elegant touch, making it a statement piece in any home.

The Jotul F 400 is equipped with advanced combustion technology that promotes a cleaner burn, resulting in reduced emissions. This feature is particularly important in today’s environmentally conscious market, as it aligns with stricter regulations on woodstove emissions. The stove features a secondary combustion system that helps to maximize fuel efficiency while minimizing smoke output, allowing users to enjoy the ambiance of a wood fire without excessive pollutants.

Another notable characteristic of the F 400 is its easy-to-use air control system. This allows users to easily adjust the airflow to the fire, optimizing it for lighting, burning, and maintaining desired temperatures. The large, self-cleaning glass door provides an unobstructed view of the flames, enhancing the ambiance of any room.

In summary, the Jotul F 400 woodstove is a blend of efficiency, beauty, and innovation. Its capacity to heat large spaces, coupled with advanced combustion technology and classic design, makes it one of the top choices for homeowners looking for a reliable and attractive heating solution. Whether for cozy evenings or efficient heating, the Jotul F 400 is sure to enhance any living space.