SoundCraft RK-65K manual Delete a Transponder From The System RK65K

Radio Key® RK-65K Operating Guide

Add A Series Of Transponders To The System (RK65K): Place the unit into the Program mode (see Page 8). Press Add, followed by the sequence of digits representing the lowest transponder ID number. Then press Thru, followed by the sequence of digits representing the highest transponder ID number. Then press Enter. For example, to add transponders #1 through #10 to the system:

+ 1 + + 1 + 0 +

(ADD)	(Starting (THRU)	(Ending User ID	(ENTER)
	User No. 1)	Number 10)

Transponder number 1 through 10 are now valid.

Delete A Transponder From The System (RK65K):

Place the unit in the Program Mode (see Page 8). Press Void, followed by the sequence of digits representing the transponder ID number.Then press Enter. For example, to delete transponder #12, the following sequence would be presented:

+ 1 + 2 +

(VOID) (User ID Number 12) (ENTER)

Transponder #12 is now void.

Secura Key 11