SoundCraft RK-65K manual Basic Operation RK65K/RK100M

Page 22

Radio Key® RK-65K

Operating Guide

For example, to program the input for LED control, the following sequence would be followed:

+

+

2

+

(THRU)

(THRU) (Input No. 2)

(ENTER)

BASIC OPERATION (RK65K/RK100M)

To use a Key Tag with Radio Key® RK-65K, simply hold your Radio Key® Transponder near the Radio Key® RK-65K Unit. The Radio Key® RK-65K Unit generates an RF ﬁ eld, which causes the Key Tag to transmit a unique Transponder ID Number back to the Unit.

If the Transponder ID Number is stored in memory, the latch relay is activated, unlocking the controlled door or gate . A green light and a beep indicates that access is granted. If the Transponder ID Number is not stored in memory, the door or gate remains locked and a red light and beep indicate that access is denied. Otherwise the LED is normally off.

Secura Key

19

Image 22

Contents With RK100M instructions Stand Alone Proximity Access Control SystemWith Dynascan Technology Copyright Radio Key RK-65K/RK-65KS Operating Guide Introduction Radio Key RK-65KSecura Key Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps To Enter Program Mode RK65K/RK100M Change your Password RK65K/RK100MSetting Facility Codes RK65K Lost or forgotten Password RK65K/RK100M+ 4 + 3 + + 1 + Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Set the Latch Timer RK65K/RK100M Delete a Series Of Transponders From The System RK65KSetting the Latch Timer RK65K/RK100M Programming HintsSet the Operating Mode RK65K/RK100M To Exit Programming Mode Immediately RK65K/RK100M Timed AntipassbackRK65KSet Antipassback Timer RK65K Enable Timed Antipassback RK65KDisable Timed Antipassback RK65K Conﬁgure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key For RK100M mode Secura Key Converting to RK100M ModeFor RK65K mode + 6 + Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Range of Transponders from System Delete a Transponder by Presenting to ReaderDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Environment OperationalFCC ID NNHRK-100M Instruction to the User