SoundCraft RK-65K manual RK-HHP Handheld Programmer and the RK-PD1 Program Deck

Page 9

Radio Key® RK-65K

Operating Guide

THE RK-HHP HANDHELD PROGRAMMER AND THE RK-PD1 PROGRAM DECK

Note: The RK-PD1 or the RK-HHP is required to program the reader. One RK-PD1 or RK-HHP may be used on several readers.

The RK-PD1 consists of the 16 following cards:

	ENTER	“7”		SEVEN
“0”	ZERO	“8”		EIGHT
“1”	ONE	“9”		NINE
“2”	TWO	“	”	THRU
“3”	THREE	“	”	VALID
“4”	FOUR	“	”	VOID
“4”	FOUR			VOID
“5”	FIVE			SET TIMER
“6”	SIX			MODE

Presenting these cards to the Radio Key® RK-65K is equivalent to pressing the identically marked keys on the RK-HHP hand- held programmer. As you present program cards to the unit, it will chirp to indicate that it has read the card. The next sections of this manual explain the program card sequences used to perform the various program functions.

Secura Key 6

Image 9

Contents Stand Alone Proximity Access Control System With RK100M instructionsWith Dynascan Technology Copyright Radio Key RK-65K/RK-65KS Operating Guide Radio Key RK-65K IntroductionSecura Key Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps Change your Password RK65K/RK100M To Enter Program Mode RK65K/RK100MLost or forgotten Password RK65K/RK100M Setting Facility Codes RK65K+ 4 + 3 + + 1 + Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Delete a Series Of Transponders From The System RK65K Set the Latch Timer RK65K/RK100MProgramming Hints Setting the Latch Timer RK65K/RK100MSet the Operating Mode RK65K/RK100M Timed AntipassbackRK65K To Exit Programming Mode Immediately RK65K/RK100MEnable Timed Antipassback RK65K Set Antipassback Timer RK65KDisable Timed Antipassback RK65K Conﬁgure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key For RK65K mode + 6 + Converting to RK100M ModeFor RK100M mode Secura Key Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Transponder by Presenting to Reader Delete a Range of Transponders from SystemDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Operational EnvironmentFCC ID NNHRK-100M Instruction to the User