SoundCraft RK-65K manual Conﬁgure the Relay RK65K/RK100M

Page 20

Radio Key® RK-65K

Operating Guide

Conﬁgure the Relay (RK65K/RK100M)

The relay is set at the factory to be normally open and to close upon presentation of a valid transponder or upon activation of the remote open (Request to Exit) input. It may be changed to normally closed or to SecuRelay™ operation. A normally open relay is used for a “fail-secure” electric lock or door strike and to trigger a gate operator. A normally closed relay is used for “fail-safe” devices such as magnetic locks. The Secura Key SecuRelay™ (sold separately) is a remote intelligent relay used to prevent entry when the access control unit is physically attacked. (NOTE: When placed in the SecuRelay™ mode the “Remote Open” input is disabled.) To conﬁ gure the relay, put the unit in the Program mode (See Page 8). Press THRU two times. Then press either the “6”, “7” or “8”. Press ENTER.

Selections are:

6.Normally Open (Factory default)

7.Normally Closed

8.SecuRelay™ Option.

For example, to configure the relay normally closed, the following sequence would be followed:

	+	+	7	+
(THRU)	(THRU)			(ENTER)

Secura Key

17

Image 20

Contents With Dynascan Technology Stand Alone Proximity Access Control SystemWith RK100M instructions Copyright Radio Key RK-65K/RK-65KS Operating Guide Secura Key Radio Key RK-65KIntroduction Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps To Enter Program Mode RK65K/RK100M Change your Password RK65K/RK100M+ 4 + 3 + + 1 + Lost or forgotten Password RK65K/RK100MSetting Facility Codes RK65K Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Set the Latch Timer RK65K/RK100M Delete a Series Of Transponders From The System RK65KSetting the Latch Timer RK65K/RK100M Programming HintsSet the Operating Mode RK65K/RK100M To Exit Programming Mode Immediately RK65K/RK100M Timed AntipassbackRK65KDisable Timed Antipassback RK65K Enable Timed Antipassback RK65KSet Antipassback Timer RK65K Conﬁgure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key Converting to RK100M Mode For RK65K mode + 6 +For RK100M mode Secura Key Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Range of Transponders from System Delete a Transponder by Presenting to ReaderDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Environment OperationalFCC ID NNHRK-100M Instruction to the User