SoundCraft RK-65K manual Ordering Transponders

Page 6

Radio Key® RK-65K

Operating Guide

ORDERING TRANSPONDERS

The Radio Key® RK-65K works with Secura Key RKCM-02 molded (clamshell) cards, RKCI-02 ISO-standard cards and RKKT-02 key ring tags. Card Format 303 and Format 201 can be used.

When you order Format 303 transponders for a new project you will be assigned a new Facility Code and your transponders will begin with ID number 1. As you need additional cards or tags you can order the same Facility Code, specifying the starting number, which will be one digit higher than your highest existing transponder.

If you use Format 201, these are shipped from stock and you may receive cards or tags with a different Facility Code than you originally programmed into the reader. The RK-65K can learn up to 10 different Facility Codes. If it becomes necessary to mix transponderswithmorethanoneFacilityCodeinthesamereader, be sure that the transponder ID numbers are not duplicated.

NOTE: RKxx-01 cards or keytags will not work for the RK65K. The LED will flash amber to let you know it is the wrong type of card.

Secura Key

3

Image 6

Contents Stand Alone Proximity Access Control System With RK100M instructionsWith Dynascan Technology Copyright Radio Key RK-65K/RK-65KS Operating Guide Radio Key RK-65K IntroductionSecura Key Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps To Enter Program Mode RK65K/RK100M Change your Password RK65K/RK100MLost or forgotten Password RK65K/RK100M Setting Facility Codes RK65K+ 4 + 3 + + 1 + Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Set the Latch Timer RK65K/RK100M Delete a Series Of Transponders From The System RK65KSetting the Latch Timer RK65K/RK100M Programming HintsSet the Operating Mode RK65K/RK100M To Exit Programming Mode Immediately RK65K/RK100M Timed AntipassbackRK65KEnable Timed Antipassback RK65K Set Antipassback Timer RK65KDisable Timed Antipassback RK65K Conﬁgure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key For RK100M mode Secura Key Converting to RK100M ModeFor RK65K mode + 6 + Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Range of Transponders from System Delete a Transponder by Presenting to ReaderDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Environment OperationalFCC ID NNHRK-100M Instruction to the User