SoundCraft RK-65K manual Add a Series of Transponders to the System

Page 27

Radio Key® RK-65K

Operating Guide

Add a Transponder by Entering the Transponder ID: Instead of presenting the transponder, you can also use the Programmer to enter the Transponder ID number: Put the unit into the Program mode (See Page 8). Press ADD then press the sequence of digits representing the desired User ID Number (1 - 100). Press THRU. Press the sequence of digits representing the ID number printed on the Transponder, then press ENTER. For example, to program a Transponder ID Number 995 into User ID Number 12, the following sequence would be followed;

+

1

+

2

+

(ADD)

(User ID Number 12)

(THRU)

+

9

+

9

+

5

+

 

 

(ID Number 995)

 

(ENTER)

Record the User ID Number and Transponder ID Number in the User Log Form.

NOTE:IfyouassignanewtranspondertoaUserIDNumberwhere another transponder was already assigned, the new transponder will replace the old transponder for that User ID Number.

Add a Series of Transponders to the System:

Put the unit into the Program mode (See Page 8). Press ADD, then press the sequence of digits representing the desired

Secura Key

24

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Stand Alone Proximity Access Control System With RK100M instructionsWith Dynascan Technology Copyright Radio Key RK-65K/RK-65KS Operating Guide Radio Key RK-65K IntroductionSecura Key Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps Change your Password RK65K/RK100M To Enter Program Mode RK65K/RK100MLost or forgotten Password RK65K/RK100M Setting Facility Codes RK65K+ 4 + 3 + + 1 + Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Delete a Series Of Transponders From The System RK65K Set the Latch Timer RK65K/RK100MProgramming Hints Setting the Latch Timer RK65K/RK100MSet the Operating Mode RK65K/RK100M Timed AntipassbackRK65K To Exit Programming Mode Immediately RK65K/RK100MEnable Timed Antipassback RK65K Set Antipassback Timer RK65KDisable Timed Antipassback RK65K Configure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key Converting between RK-65K and RK100M modes Converting to RK100M ModeFor RK65K mode + 6 + For RK100M mode Secura KeyAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Transponder by Presenting to Reader Delete a Range of Transponders from SystemDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Operational EnvironmentFCC ID NNHRK-100M Instruction to the User
Top Page Image Contents