SoundCraft manual Converting to RK100M Mode, Converting between RK-65K and RK100M modes, + 5 +

Page 24

Radio Key® RK-65K

Operating Guide

CONVERTING TO RK100M MODE

The RK100M has been replaced by the new RK-65K. The RK100M was designed to read randomly numbered cards and tags without facility codes (RKCM-01,RKKT-01). The RK100M unit is only able to enroll up to 100 users. If you need to replace an existing RK100M, or if you want a reader that uses random cards and tags, you may convert this product to the RK100M mode, as shown below.

In the RK100M mode, some programming steps differ from the RK-65K. The following section also describes those different program steps.

Converting between RK-65K and RK100M modes:

Place the unit in the Program Mode (see Page 8). Press MODE, followed by “5” (for RK65K mode) or “6” (for RK100M mode). Press ENTER. (RK-65K mode is the default.)

+ 5 +

(MODE)

(Mode Number 5) (ENTER)

(For RK65K mode)

+ 6 +

(MODE)

(Mode Number 6) (ENTER)

(For RK100M mode)

Secura Key

21

Image 24

Contents Stand Alone Proximity Access Control System With RK100M instructionsWith Dynascan Technology Copyright Radio Key RK-65K/RK-65KS Operating Guide Radio Key RK-65K IntroductionSecura Key Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps To Enter Program Mode RK65K/RK100M Change your Password RK65K/RK100MLost or forgotten Password RK65K/RK100M Setting Facility Codes RK65K+ 4 + 3 + + 1 + Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Set the Latch Timer RK65K/RK100M Delete a Series Of Transponders From The System RK65KSetting the Latch Timer RK65K/RK100M Programming HintsSet the Operating Mode RK65K/RK100M To Exit Programming Mode Immediately RK65K/RK100M Timed AntipassbackRK65KEnable Timed Antipassback RK65K Set Antipassback Timer RK65KDisable Timed Antipassback RK65K Conﬁgure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key Converting to RK100M Mode For RK65K mode + 6 +For RK100M mode Secura Key Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Range of Transponders from System Delete a Transponder by Presenting to ReaderDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Environment OperationalFCC ID NNHRK-100M Instruction to the User