SoundCraft RK-65K manual Delete a Range of Transponders from System

Page 29

Radio Key® RK-65K

Operating Guide

Delete a Range of Transponders from System:

Put the unit into the Program mode (See Page 8). Press VOID, then press the sequence of digits representing the desired starting User ID Number. Press THRU, then press the sequence of digits representing the desired ending User ID Number. Finally, press ENTER. A green light and beep mean that the range of Transponders was deleted.

+

1

+

(VOID)

(Starting User (THRU)

 

No. 1)

+

1

+

0

+

(Ending User ID

(ENTER)

Number 10)

 

Delete a Transponder by Presenting to Reader:

Put the unit into the Program mode (See Page 8). Press VOID, then press ENTER. Hold the Transponder near the Radio Key® 100M Unit. A green light and beep means that the Transponder was deleted.

+

(VOID)(ENTER)

(Hold Key Tag near Unit)

Secura Key

26

Image 29
Contents With Dynascan Technology Stand Alone Proximity Access Control SystemWith RK100M instructions Copyright Radio Key RK-65K/RK-65KS Operating Guide Secura Key Radio Key RK-65KIntroduction Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps Change your Password RK65K/RK100M To Enter Program Mode RK65K/RK100M+ 4 + 3 + + 1 + Lost or forgotten Password RK65K/RK100MSetting Facility Codes RK65K Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Delete a Series Of Transponders From The System RK65K Set the Latch Timer RK65K/RK100MProgramming Hints Setting the Latch Timer RK65K/RK100MSet the Operating Mode RK65K/RK100M Timed AntipassbackRK65K To Exit Programming Mode Immediately RK65K/RK100MDisable Timed Antipassback RK65K Enable Timed Antipassback RK65KSet Antipassback Timer RK65K Configure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key For RK65K mode + 6 + Converting to RK100M ModeFor RK100M mode Secura Key Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Transponder by Presenting to Reader Delete a Range of Transponders from SystemDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Operational EnvironmentFCC ID NNHRK-100M Instruction to the User