SoundCraft manual Radio Key RK-65K, Introduction, Secura Key

Page 4

Radio Key® RK-65K

Operating Guide

INTRODUCTION

The Radio Key® RK-65K is a programmable single-door access control system which controls access for up to 65,000 users. It can control an electric strike, magnetic lock, or gate operator, and has an additional programmable input which may be set as a remote open input or as an LED/Beeper control for use with the Wiegand output. A Wiegand output is also provided to allow for later upgrading to an on line system. Information on using the RK-65K as a Wiegand reader is contained on page 18 The major components are shown in Figures 1 and 2.

The Radio Key® RK-65K Access Control Unit contains the CPU, memory, access relay, and an internal reader. It has a beeper, and a bi-color LED indicator. An RK-HHP Handheld Programmer or an RK-PD1 Program Deck (not included), is used to add or delete tran- sponders, to set the operating mode, to program the password and latch timer. The Radio Key® RK-65K is compatible with the Secura Key SecuRelay™, an intelligent relay module used to eliminate the possibility of break-in by attacking the access control unit.

ThecurrentversionofthisproductalsoreplacestheRK100M. TheRK100Mreadsrandomlyencodedtagsandsupportsonly 100 users. To convert this unit to RK100M mode, follow the instructions on Page 21.

Secura Key

1

Page 3 Page 5
Image 4
Page 3 Page 5
Contents With RK100M instructions Stand Alone Proximity Access Control SystemWith Dynascan Technology Copyright Radio Key RK-65K/RK-65KS Operating Guide Introduction Radio Key RK-65KSecura Key Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps To Enter Program Mode RK65K/RK100M Change your Password RK65K/RK100MSetting Facility Codes RK65K Lost or forgotten Password RK65K/RK100M+ 4 + 3 + + 1 + Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Set the Latch Timer RK65K/RK100M Delete a Series Of Transponders From The System RK65KSetting the Latch Timer RK65K/RK100M Programming HintsSet the Operating Mode RK65K/RK100M To Exit Programming Mode Immediately RK65K/RK100M Timed AntipassbackRK65KSet Antipassback Timer RK65K Enable Timed Antipassback RK65KDisable Timed Antipassback RK65K Configure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key Converting to RK100M Mode For RK65K mode + 6 +For RK100M mode Secura Key Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Range of Transponders from System Delete a Transponder by Presenting to ReaderDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Environment OperationalFCC ID NNHRK-100M Instruction to the User
Top Page Image Contents