SoundCraft RK-65K manual Program the Input RK65K/RK100M

Page 21

Radio Key® RK-65K

Operating Guide

Using the RK-65K as a Wiegand Output Reader (RK65K/RK100M)

The RK-65K can be connected to a multidoor access control system (such as the Secura Key SK-ACP) using the Wiegand output. When any Radio Key® transponder is presented to the unit, whether or not it has been programmed into the unit, the appropriate transponder ID will be sent out via the white and green wires.

Program the Input (RK65K/RK100M)

The input is set at the factory as a Remote Open input. Connecting the brown and the orange wire (usually with a push button switch) will activate the relay for the time set for the latch timer. This input may also be confi gured as an LED control or as an LED/beeper control. When confi gured as an LED control, grounding the brown wire will turn on the Red LED, grounding the orange wire will turn on the Green LED and grounding the yellow wire will turn on the beeper.

To confi gure the input, put the unit into the Program mode, (See Page 8). Press THRU TWICE. Then press either the “1” or “2” button. Press ENTER. Selections are:

“1” - Remote Open (Factory default). “2” - LED Control.

Secura Key 18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Stand Alone Proximity Access Control System With RK100M instructionsWith Dynascan Technology Copyright Radio Key RK-65K/RK-65KS Operating Guide Radio Key RK-65K IntroductionSecura Key Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps Change your Password RK65K/RK100M To Enter Program Mode RK65K/RK100MLost or forgotten Password RK65K/RK100M Setting Facility Codes RK65K+ 4 + 3 + + 1 + Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Delete a Series Of Transponders From The System RK65K Set the Latch Timer RK65K/RK100MProgramming Hints Setting the Latch Timer RK65K/RK100MSet the Operating Mode RK65K/RK100M Timed AntipassbackRK65K To Exit Programming Mode Immediately RK65K/RK100MEnable Timed Antipassback RK65K Set Antipassback Timer RK65KDisable Timed Antipassback RK65K Configure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key For RK65K mode + 6 + Converting to RK100M ModeFor RK100M mode Secura Key Converting between RK-65K and RK100M modesAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Transponder by Presenting to Reader Delete a Range of Transponders from SystemDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Operational EnvironmentFCC ID NNHRK-100M Instruction to the User
Top Page Image Contents