SoundCraft RK-65K manual Secura Key

Page 23

Radio Key® RK-65KOperating Guide

Remote Open (Request to Exit) Input (RK65K/RK100M)

When the Remote open input is activated, the relay will activate. When the remote open input is deactivated, the relay will return to the inactive state after the latch timer times out. A green light and a beep indicates that access is granted.

NOTE: Remote Open Input is disabled when the unit is conﬁ gured for use with SecuRelay™.

Secura Key 20

Image 23

Contents With Dynascan Technology Stand Alone Proximity Access Control SystemWith RK100M instructions Copyright Radio Key RK-65K/RK-65KS Operating Guide Secura Key Radio Key RK-65KIntroduction Using RK-PD1 or RK-HHP Ordering Transponders Programming Radio KEY RK-65K Programming Radio KEY 100M RK-HHP Handheld Programmer and the RK-PD1 Program Deck Programming Steps Change your Password RK65K/RK100M To Enter Program Mode RK65K/RK100M+ 4 + 3 + + 1 + Lost or forgotten Password RK65K/RK100MSetting Facility Codes RK65K Adding and Deleting Users RK65K Delete a Transponder From The System RK65K Delete a Series Of Transponders From The System RK65K Set the Latch Timer RK65K/RK100MProgramming Hints Setting the Latch Timer RK65K/RK100MSet the Operating Mode RK65K/RK100M Timed AntipassbackRK65K To Exit Programming Mode Immediately RK65K/RK100MDisable Timed Antipassback RK65K Enable Timed Antipassback RK65KSet Antipassback Timer RK65K Conﬁgure the Relay RK65K/RK100M Program the Input RK65K/RK100M Basic Operation RK65K/RK100M Secura Key Converting between RK-65K and RK100M modes Converting to RK100M ModeFor RK65K mode + 6 + For RK100M mode Secura KeyAdding and Deleting Users Radio KEY 100M ADD Add a Series of Transponders to the System Delete a Transponder from the System Delete a Transponder by Presenting to Reader Delete a Range of Transponders from SystemDelete a Transponder by Entering Transponder ID Warranty U.S. and Canadian Specifications Operational EnvironmentFCC ID NNHRK-100M Instruction to the User