Radio Key® RK-65K | Operating Guide |
(THRU) | (New Password - 54321) | |
| + | 5 + 4 + 3 + 2 | + 1 + |
| + | 5 + 4 + 3 + 2 | + 1 + |
(THRU) | | (Re-type New Password - 54321) | (ENTER) |
Lost or forgotten Password (RK65K/RK100M)
If the password is lost or forgotten, it can be restored to the factory default (12345). Remove the Radio Key® RK-65K unit from the wall and disconnect power. With the Data 1 line (white wire) temporarily connected to the Remote open line (brown wire), restore power. The factory default (12345) is now in effect. The LED will fl ash alternately Red and Green. While this is occurring, set the Facility Code or Codes in the reader (see below). Remove power and reconnect the unit for operation, restore power and remount the unit. This procedure will NOT delete any transponders from reader’s memory.
Setting Facility Code(s) (RK65K)
Before any cards are added to the RK-65K you must set the Facility Code or Codes. When a new reader is first powered up the LED should be flashing alternately Red and Green. This indicates that the unit is in the “Learn Facility Code” mode.
